Table A-1lists the electrical, mechanical, and environmental specifications for the Jackrabbit boards.

Table A-1. Jackrabbit Board Specifications

Parameter

BL1800

 

BL1810

BL1820

 

 

 

 

 

Microprocessor

Rabbit 2000 @ 29.5 MHz

 

Rabbit 2000 @ 14.74 MHz

 

 

 

 

Flash EPROM

256K

 

128K

(supports 128K–512K)

 

(supports 128K–512K)

 

 

 

 

 

 

 

SRAM

 

 

128K

 

 

 

(supports 32K–512K)

 

 

 

 

 

 

 

 

Backup Battery

3 V lithium coin type, 950 mA·h,

None

supports real-time clock and SRAM

 

 

 

 

 

Digital Inputs

6, CMOS-level

7, CMOS-level

 

 

 

 

 

 

4 CMOS-level plus

 

4 CMOS-level plus

5 CMOS-level plus

 

4 high-power outputs—3

 

4 high-power outputs—3

4 high-power outputs—3

Digital Outputs

sink up to 1 A and 30 V

 

sink up to 200 mA and

sink up to 200 mA and

 

each, 1 sources up to

 

30 V each, 1 sources up

30 V each, 1 sources up

 

500 mA

 

to 100 mA

to 100 mA

 

 

 

 

 

Configurable I/O

14 CMOS-level: 8 are bytewide, 6 are by bit

15 CMOS-level:

8 are bytewide, 7 are by bit

 

 

 

 

 

 

 

Analog Inputs

One low-grade A/D input—input range 0.1 V to 2.8 V,

9-bit resolution, 8-bit accuracy, 10 samples/s

 

 

 

Analog Outputs

Two 9-bit filtered and buffered PWM outputs,

one 0.1–2.8 V DC, one 0.7–3.5 V DC, update rate 50 Hz

 

 

 

 

 

 

 

Up to four serial ports:

 

 

 

 

two RS-232 or one RS-232 (with CTS/RTS) rated at 15 kV ESD

Serial Ports

one RS-485 rated at 15 kV ESD (RS-485 driver not installed on BL1820)

 

one 5 V CMOS-compatible programming port

 

 

Two serial ports (A and B) can be clocked.

 

 

 

Serial Rate

Max. burst rate = CLK/32 (async)

Max. sustained rate = CLK/64

 

 

 

Connectors

Two 2 × 20, 2 mm IDC headers

 

 

 

 

 

Real-Time Clock

 

 

Yes

 

 

 

Timers

Five 8-bit timers (four cascadable from the first)

and one 10-bit timer with two match registers

 

 

 

 

 

 

Watchdog/Supervisor

 

 

Yes

 

 

 

 

 

 

Power

8–40 V DC, 1.2 W max.,

 

7.5–25 V DC, 100 mA, linear regulator

switching regulator

 

 

 

 

 

 

 

 

 

 

Operating Temperature

 

 

–40°C to +70°C

 

 

 

 

 

Humidity

 

5% to 95%, noncondensing

 

 

 

 

 

Board Size

2.50" × 3.50" × 0.76"

 

2.50" × 3.50" × 0.94"

2.50" × 3.50" × 0.63"

(64 mm × 89 mm × 19 mm)

(64 mm × 89 mm × 24 mm)

(64 mm × 89 mm × 16 mm)

 

 

 

 

 

 

User’s Manual

59

Page 63
Image 63
Digi BL1800 user manual Table A-1. Jackrabbit Board Specifications