INSTALLATION AND OPERATION MANUAL

MF3700, MF3800 Models

caution

Installation and repair of this parlor stove should be done by a qualified service person. The appliance should be inspected before use and at least annually by a qualified service person. It is imperative that control compartments, fire box, and circulating air passageways of the stove be kept clean.

The operation of exhaust fans such as bathroom fans, attic fans, etc. might starve the parlor stove of combustible air creating a negative pressure in the room. Provide adequate ventilation of the room accompanying the parlor stove. If not, the pressure switch may shut off operation of the parlor stove.

The moving parts of this stove are propelled by high torque electric motors. These parts can cause severe damage to body parts that get near them. Keep all body parts away from auger and fans while the stove is plugged into an electrical outlet. These moving parts may begin to move at any time the stove is plugged in.

If the electrical power fails any time when the stove is hot, keep all stove doors closed.

Vent surfaces can get hot enough to cause burns if touched. Noncombustible shielding or guards may be required.

Install vent at clearances specified by the vent manufacturer.

All venting joints, whether vertical or horizontal, should be made gas-tight with recommended sealants specified by vent manufacturer.

According to HUD (Housing & Urban Development) requirements, when installed in a mobile home, this stove must be grounded directly to the steel chassis of the mobile home and bolted to the floor. Direct air access must be provided, use a Fresh Air Kit.

For use in the United States. Approved for installation in mobile homes.

Cumberland Stove Works, manufacturer of this appliance, reserves the right to alter its products, specifications and/or price without notice.

WARNING

If the electrical power fails any time when the stove is hot, keep all stove doors closed.

THE AUTOMATIC SAFETY FEATURES MUST NOT BE BYPASSED.

When resetting overtemp never use any conductors. Could Cause Electrical Shock and/or damage to stove.

AUTOMATIC SAFETY FEATURES

Power Outage

During a power outage, the stove will shutdown safely. It will not automatically restart when the power returns. If the stove is still at operating termperature when power returns, the convection fan will circulate the remaining heat in the stove. See Lighting Instructions.

Overheating

Over Fire Protection: If the stove is being over fired or burning too hot, the high limit switches will automatially shut down the stove to avoid damage to components. Allow the stove to cool at least one hour before relighting. The exhaust over temp is located in the rear of the stove (figure 1), the auger over temp is located on the auger housing (figure 2). Both are reset by manually pressing in the button located between the wire terminals.

push to reset

Figure 1: Overtemp Reset Button in Back Panel

push to reset

 

Figure 2: Overtemp Reset Button on auger housing

 

800-345-6007

CumberlandStoveWorks.com

Page

Page 6 Page 8
Page 7
Image 7
Cumberland Stove Works MF3700, MF3800 warranty Automatic Safety Features Must not be Bypassed
Page 6 Page 8

MF3700, MF3800 specifications

Cumberland Stove Works is renowned for producing high-quality wood and pellet stoves that combine traditional efficiency with modern technology. Among their standout models are the MF3800 and MF3700, both of which showcase the company’s commitment to craftsmanship, innovation, and user satisfaction.

The MF3800 and MF3700 are designed for exceptional heating performance while offering expressive aesthetics that complement any home environment. These stoves are equipped with powerful heating capabilities, making them ideal for larger spaces. With robust construction and a focus on efficiency, both models have been engineered to provide maximum heat output while minimizing fuel consumption.

One of the most notable features of the MF3800 is its large firebox, which allows for an extended burn time. This capability translates into less frequent reloading, making it a convenient choice for busy households. The MF3700, while slightly smaller, still boasts an impressive firebox design, accommodating ample logs for efficient heating. Both models are equipped with a state-of-the-art air control system that optimizes combustion, ensuring a clean and efficient burn.

Both stoves incorporate advanced technologies such as secondary combustion systems that enhance fuel efficiency and reduce emissions. This means that users not only save on fuel costs but also contribute to a cleaner environment. The MF3800 and MF3700 feature a large viewing window, framed with durable glass, that allows occupants to enjoy a mesmerizing view of the flames while ensuring safety and heat retention.

Another significant characteristic of these models is the ease of use facilitated by user-friendly controls. The stoves are designed to be simple to operate, enabling users to adjust the airflow and temperature settings with minimal effort. This ensures a consistent and comfortable heat output that can be tailored to individual preferences.

In terms of decorative appeal, both stoves come with various finishes and accessory options, allowing homeowners to customize them to fit their decor. With a focus on longevity and reliability, Cumberland Stove Works provides a durable warranty, giving customers peace of mind with their investment.

In summary, the MF3800 and MF3700 models from Cumberland Stove Works represent a perfect blend of functionality, efficiency, and style, making them excellent choices for anyone looking to enhance their home heating solution.
Top Page Image Contents