Cumberland Stove Works MF3700, MF3800 warranty Outside AIR Connection, Mobile Home

Models: MF3700 MF3800

1 32
Download 32 pages 54.03 Kb
Page 17
Image 17

INSTALLATION AND OPERATION MANUAL

MF3700, MF3800 Models

OUTSIDE AIR CONNECTION

Connection from the intake pipe (2” diameter pipe in rear of stove) to the outside of the house is REQUIRED for mobile home installation. It is recommended in tightly sealed homes with exhaust fans such as kitchen or bathroom fans. This will eliminate poor performance due to negative pressure.

Only noncombustible pipe 2” (or greater) in diameter is approved to use for outside air connections (straight or

flexible). PVC pipe is NOT approved and should NEVER be connected to the stove.

If the air inlet is connected to the outside, it MUST be terminated with a vertical 90º bend (down) or with a wind hood. Failure to do so could result in a burn back during high winds blowing directly up the air inlet during a simultaneous power failure.

Blockage, excessive length, or extra bends in the air intake pipe will starve the stove of combustion air. A 90º bend is equivalent in restriction to approximately 30” of straight inlet pipe.

MOBILE HOME

WARNING

DO NOT CONNECT TO ANY AIR DISTRIBUTION DUCT OR SYSTEM.

do not install in a sleeping room.

CAUTION

THE OPERATION OF EXHAUST FANS SUCH AS BATHROOM FANS, ATTIC FANS, ETC. MIGHT STARVE THE PARLOR STOVE OF COMBUSTIBLE AIR CREATING A NEGATIVE PRESSURE IN THE ROOM. PROVIDE ADEQUATE VENTILATION IN THE ROOM ACCOMPANYING THE PARLOR STOVE. IF NOT, THE PRESSURE SWITCH MAY SHUT OFF OPERATION OF THE PARLOR STOVE.

THE STRUCTURAL INTEGRITY OF THE MANUFACTURED HOME FLOOR, WALL, AND CEILING/ROOF MUST BE MAINTAINED.

UNDERSTANDING THE TRI-X CONTROLLER

1 - On - Starts stove operation when instructed. 2 - Off - Turns off stove operation at anytime

Installation in a mobile home should be in accordance with the manufactured home and safety standard. Department of Housing and Urban Development (HUD) CITE: 24CFR3280.707 stating this stove must be vented to the outside. In addition to the standard installation instructions, the following requirements are mandatory for installation in a mobile home:

1.Stove must be bolted to the floor. Stove will have four tie-down straps that bolt to the feet and the floor.

2.Stove must have an outside air source.

3.Stove must be electrically grounded to the steel chassis of the mobile home.

4.All vertical chimney vents must have wall supports.

5.All exhaust systems must have a spark arrestor.

Note: Off Button will not instantly extinguish fire 3 & 4 - Temp Up, Temp Down

Controls heat levels 1-6 and local thermostat temperature.

5 & 6 - Fan Up, Fan Down

Controls level of convection fan (the fan that circulates warm air through the room).

7 - Add Fuel

Pressing the Add Fuel Button will turn on the feed auger. A L.E.D. light on the top right corner will be on when the auger is running. Pressing this button once will turn the auger on for one minute. If the button is pressed within the minute, the auger will then turn off.

8 - Thermostat On/Off

Push to scroll through thermostat options; local, remote, or none.

9 - Scroll

Allows user to change heat ranges. Allows user to browse heat ranges. MF3800 users have the option of running the igniter during normal operation.

10 - Enter - Chooses the top selection of the screen

 

 

 

1

3

5

7

9

 

 

 

2

4

6

8

10

Tie-down Straps

 

Lag Screw

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Figure 21: Mobile Home Anchor & Leg Assembly

Figure 22: Controller key pad.

 

800-345-6007

CumberlandStoveWorks.com

 

Page 15

Page 17
Image 17
Cumberland Stove Works MF3700, MF3800 warranty Outside AIR Connection, Mobile Home, Understanding the TRI-X Controller

MF3700, MF3800 specifications

Cumberland Stove Works is renowned for producing high-quality wood and pellet stoves that combine traditional efficiency with modern technology. Among their standout models are the MF3800 and MF3700, both of which showcase the company’s commitment to craftsmanship, innovation, and user satisfaction.

The MF3800 and MF3700 are designed for exceptional heating performance while offering expressive aesthetics that complement any home environment. These stoves are equipped with powerful heating capabilities, making them ideal for larger spaces. With robust construction and a focus on efficiency, both models have been engineered to provide maximum heat output while minimizing fuel consumption.

One of the most notable features of the MF3800 is its large firebox, which allows for an extended burn time. This capability translates into less frequent reloading, making it a convenient choice for busy households. The MF3700, while slightly smaller, still boasts an impressive firebox design, accommodating ample logs for efficient heating. Both models are equipped with a state-of-the-art air control system that optimizes combustion, ensuring a clean and efficient burn.

Both stoves incorporate advanced technologies such as secondary combustion systems that enhance fuel efficiency and reduce emissions. This means that users not only save on fuel costs but also contribute to a cleaner environment. The MF3800 and MF3700 feature a large viewing window, framed with durable glass, that allows occupants to enjoy a mesmerizing view of the flames while ensuring safety and heat retention.

Another significant characteristic of these models is the ease of use facilitated by user-friendly controls. The stoves are designed to be simple to operate, enabling users to adjust the airflow and temperature settings with minimal effort. This ensures a consistent and comfortable heat output that can be tailored to individual preferences.

In terms of decorative appeal, both stoves come with various finishes and accessory options, allowing homeowners to customize them to fit their decor. With a focus on longevity and reliability, Cumberland Stove Works provides a durable warranty, giving customers peace of mind with their investment.

In summary, the MF3800 and MF3700 models from Cumberland Stove Works represent a perfect blend of functionality, efficiency, and style, making them excellent choices for anyone looking to enhance their home heating solution.