Troubleshooting — If no Image Appears

1.

Ensure that all devices are plugged in and powered on. The switcher is

 

receiving power if one of the input LEDs is lit.

2.

Ensure an active input is selected on the switcher or that the switcher is in

 

autoswitch mode.

3.

Ensure that the proper signal format is supplied.

4.

Check the cabling and make corrections as necessary.

5.

Call the Extron S3 Sales & Technical Support Hotline if necessary.

SW AV Series Switchers • Operation 3-13

Page 33
Image 33
Extron electronic SW AV manual Troubleshooting If no Image Appears