Audio controls and indicators (audio switchers)
Audio switchers have audio gain and attenuation adjustments.
5
6
7
8
9
Audio configuration/save button and LED — The Audio button and LED enable the user to view and/or change the current audio level setting for each input. See Adjusting audio gain and attenuation (audio switchers) in this chapter.
Down () button and LED — The button is used to decrease the audio level for a selected input. Press and release the button to decrease the audio level or press and hold the button to decrease the audio level at a rate of 3 dB per second until the button is released.
The LED flashes to indicate each 1 dB decrease in the audio level. See Adjusting audio gain and attenuation (audio switchers) in this chapter.
On
Up () button and LED — The button is used to increase the audio level for a selected input. Press and release the button to increase the audio level or press and hold the button to increase the audio level at a rate of 3 dB per second until the button is released.
The LED flashes to indicate each 1 dB increase in the audio level. See Adjusting audio gain and attenuation (audio switchers) in this chapter.
On
Audio level indicators — The Input 1 through Input 4 LEDs each indicate a range of 6 dB when lit (Input 1 LED: off = 0 dB to 5 dB, Input 1 LED: lit = 6 dB to 11 dB, Input 1 and 2 LED: lit = 12 dB to 17 dB, and so on). See Adjusting audio gain and attenuation (audio switchers) in this chapter.
Autoswitch mode controls and indicator (video switchers)
Video switchers support autoswitch mode. When autoswitch mode is enabled, the switcher continuously monitors all inputs and automatically switches to the
10Mode button — The Mode button is used with the Normal button or the Auto button to select the switching mode. See Switch mode in this chapter.
This button is a secondary function of the Input 1 button.
11Normal button — The Normal button is used with the Mode button to select normal mode. See Switch mode in this chapter.
This button is a secondary function of the Input 2 button.
When you change from autoswitch to normal (manual) mode, the last input selected in autoswitch mode remains selected until you manually select a different input.
12Auto(switch) button — The Auto button is used with the Mode button to select autoswitching mode. See Switch mode in this chapter.
This button is a secondary function of the Input 3 button.