INSTALLATION AND OPERATION MANUAL

MF3700, MF3800 Models

INSTALLATION

It is recommended the stove be installed and serviced by authorized professionals who are certified by the National Fireplace Institute (NFI) as NFI Pellet Specialists.

Proper installation of this stove is necessary for safe and efficient operation. Installing this product improperly may result in a house fire and personal injury. All applicable building codes for your location must be followed. In areas where building codes require additional steps to the installation of this product not included in this manual, the building codes will take precedent and must be followed. Contact your local building inspector to obtain any necessary permits or inspection guidelines before installing the product.

STOVE PLACEMENT

Sketch out a plan for installing the stove including dimensions before permanent placement. When determining the location for the stove, wall stud location is critical. You may need to adjust the location of the stove to avoid trying to vent through a wall stud. Before placing the parlor stove, connect the vent and allow for minimum clearance to combustible walls.

FLOOR PROTECTION REQUIREMENTS

The stove must be installed on a noncombustible floor, with proper floor protection, or on a masonry hearth. The hearth or noncombustible floor protector must extend a minimum of 6” in front, and 4” from each side. When a clean out t-vent is installed in the inside of a home, the floor protector must extend 2” beyond rear of t-vent. See figure 12. When stove is vented straight through the wall and the clean out t-vent is on the exterior of the home, the minimum clearance is 3” from the back of the stove to the edge of floor protector. See figure 13. The minimum floor protector material is 24 GA. sheet metal.

warning

READ THIS ENTIRE MANUAL BEFORE YOU INSTALL AND USE THIS STOVE. fAILURE TO FOLLOW THE INSTRUCTIONS MAY RESULT IN PROPERTY DAMAGE, BODILY INJURY, OR EVEN DEATH.

DO NOT INSTALL A FLUE DAMPER IN THE EXHAUST VENTING SYSTEM OF THIS UNIT.

DO NOT CONNECT THIS UNIT TO A CHIMNEY FLUE SERVING ANOTHER APPLIANCE.

Children and adults should be alerted to the hazards of high surface temperatures and should stay away to avoid bumPs to skin and/or CLothing.

Young children should be carefully supervised when they are in the same room as the stove.

Clothing and other flammable materials should not be placed on or near this unit.

CAUTION

this stove should not be used as the only source of heat in the house. Power outages and periodic maintenance will result in a total loss of heat.

CONTACT LOCAL BUILDING OR FIRE OFFICIALS ABOUT RESTRICTIONS AND INSTALLATION INSPECTION REQUIREMENTS IN YOUR AREA.

CONTACT YOUR LOCAL AUTHORITY (SUCH AS MUNICIPALBUILDINGDEPARTMENT,FIREDEPARTMENT, FIRE PREVENTION BUREAU, ETC.) TO DETERMINE THE NEED FOR A PERMIT.

KEEP COMBUSTIBLE MATERIALS (SUCH AS GRASS, LEAVES, ETC.) AT LEAST 3 FEET AWAY FROM THE FLUE OUTLET ON THE OUTSIDE OF THE BUILDING.

 

2”

4”

4”

 

6”

 

3”

4”

4”

 

6”

Installation and repair of this parlor stove should be done by a qualified service person. The appliance should be inspected before use and at least annually by a qualified service person. It is imperative that control compartments, fire box, and circulating air passageways of the stove be kept clean.

Figure 12

Figure 13

 

PARLOR STOVE FLOOR PAD CLEARANCES

 

800-345-6007

CumberlandStoveWorks.com

Page 11

Page 12 Page 14
Page 13
Image 13
Cumberland Stove Works MF3700, MF3800 warranty Installation, Stove Placement, Floor Protection Requirements
Page 12 Page 14

MF3700, MF3800 specifications

Cumberland Stove Works is renowned for producing high-quality wood and pellet stoves that combine traditional efficiency with modern technology. Among their standout models are the MF3800 and MF3700, both of which showcase the company’s commitment to craftsmanship, innovation, and user satisfaction.

The MF3800 and MF3700 are designed for exceptional heating performance while offering expressive aesthetics that complement any home environment. These stoves are equipped with powerful heating capabilities, making them ideal for larger spaces. With robust construction and a focus on efficiency, both models have been engineered to provide maximum heat output while minimizing fuel consumption.

One of the most notable features of the MF3800 is its large firebox, which allows for an extended burn time. This capability translates into less frequent reloading, making it a convenient choice for busy households. The MF3700, while slightly smaller, still boasts an impressive firebox design, accommodating ample logs for efficient heating. Both models are equipped with a state-of-the-art air control system that optimizes combustion, ensuring a clean and efficient burn.

Both stoves incorporate advanced technologies such as secondary combustion systems that enhance fuel efficiency and reduce emissions. This means that users not only save on fuel costs but also contribute to a cleaner environment. The MF3800 and MF3700 feature a large viewing window, framed with durable glass, that allows occupants to enjoy a mesmerizing view of the flames while ensuring safety and heat retention.

Another significant characteristic of these models is the ease of use facilitated by user-friendly controls. The stoves are designed to be simple to operate, enabling users to adjust the airflow and temperature settings with minimal effort. This ensures a consistent and comfortable heat output that can be tailored to individual preferences.

In terms of decorative appeal, both stoves come with various finishes and accessory options, allowing homeowners to customize them to fit their decor. With a focus on longevity and reliability, Cumberland Stove Works provides a durable warranty, giving customers peace of mind with their investment.

In summary, the MF3800 and MF3700 models from Cumberland Stove Works represent a perfect blend of functionality, efficiency, and style, making them excellent choices for anyone looking to enhance their home heating solution.
Top Page Image Contents