Curtis RCD739UK Programmed Playback, Repeat Play, To Repeat all the tracks, Random play

RCD739 (Eng.)(A5)

PROGRAMMED PLAYBACK

Up to 20 tracks can be programmed in to play in any desired sequence.

1.Press the Open button of CD Door where remarked "Open" to open the CD Door.

2.Insert a CD with the label side facing upward.

3.Close the CD compartment by pressing the upper corner of CD Door.

4.Slide the FUNCTION Switch to CD position

5.Slide the SELECTOR Switch to ON position to turn on the unit.

The CD will rotate for a while and then stop.

6.Press PROG button until "PROG 01" flashes in display.

7.Press SKIP Forward or SKIP Backward button to select a desired track to be memorized.

8.Press PROG button to program the track.

9.Repeat steps 7 and 8 to program tracks.

10.Press PLAY/PAUSE button to start playing.

To cancel program play, Press STOP button two times.

REPEAT PLAY

To Repeat Single Track

Press REPEAT button on the remote control while the track you want to repeat is playing. The "REPEAT" flashing will appear in display.

------Press REPEAT two times on the remote control.

------Press REPEAT button on the remote control twice during play.

------To repeat another track, Press REW or FWD SKIP button.

------To cancel repeat play, Press REPEAT button two times.

To Repeat all the tracks

Press REPEAT button twice during play. The "REPEAT" indicator will appear in display.

------All tracks will be played through in sequence and then the sequence will be repeated continuously.

------To cancel repeat play, press REPEAT button one time.

Random play

Press stop button to enter into stop mode, press Random button once then press play/pause button to carry out random play, "RANDOM" will appear in display.

All tracks on the disc will be played in random order, then will stop. During random playing, To cancel random play, press stop button twice.

HANDLING DISCS This product is designed to play CDs bearing the DISC Identification logo. CD not carrying this logo may not conform to the CD standard and may not play properly. Dirty, scratched, or warped discs may cause skipping or noise.

------Handle the CD only by the edges.

------To keep the CD clean , do not touch the surface of the disc.

------Return CDs to their original cases after use to avoid serious scratches that could cause the laser

pickup to skip.

------Do not expose CDs to direct sunlight, high humidity or high temperatures for extended periods of

time, as prolonged exposure to high temperatures can warp CDs

------Do not apply paper or write anything on either side of a CD. Sharp writing instruments or the

inks in some felt-tip pens, may damage the surface of a CD

TO Clean CDs:

------Fingerprints should be wiped from the surface of the CD with a soft cloth. Unlike conventional

records, CDs have no grooves to collect dust and microscopic debris, so gently wiping the CDs with a cloth removes most of the particles.

------Wipe in a straight motion from the inside to the outside of the CD.

------Never use chemicals (i.e. record cleaning sprays, anti-static sprays, benzene or thinner) to clean

CDs, as damage to the plastic of the CD may result.

- 7 -