Programmed Playback
PLAYING CASSETTE TAPES
The CD Player in this unit has a 16 track programmable memory which allows you to program up to 16 tracks on any disc for playback in any desired order. To program tracks for playback the player must be in the Stop mode. If the disc is playing, press the Stop
button to stop playback and then proceed as follows:
(1) Press the MEMORY button once. The MEMORY | . |
indicator begins flashing in the display and the | |
, |
|
1 |
2 |
3 |
, | 1 appears indicating that you should | MEMORY | |
select the track that you wish to enter into program | |||
| |||
memory number 1.
Set the VOLUME Control to a low | Slide the POWER Switch to the ON | Press the STOP/EJECT |
setting. | position. And Slide the FUNCTION | ( ) Button to open the |
| Switch to the TAPE position. | Cassette Door. |
(2) | Use the | or | buttons to select | the | first | . | |
| track to be programmed. Example: Track | 7. | , | 7 , |
| ||
| indicator does not flash in the display. |
|
| MEMORY | |||
|
|
|
|
| |||
(3) | Press the MEMORY button again. This will store | . | |||||
| track 7 into program memory number 1.And Press | ||||||
| or | buttons the display will now select | MEMORY | ||||
| the track to be entered into program memory |
| 2. | ||||
|
|
| |||||
(4) | Repeat steps (2.) And | (3.) Until you have programmed up to a maximum of 16 tracks | |||||
4 | Open surface side |
| |
| Emptiest reel |
5 | 1 |
2 |
6 | 1 | 3 |
| ||
|
| |
|
| 2 |
into the program memory. |
(5) To begin Programmed Playback press the button. The MEMORY Indicator stops |
flashing and remains On,. The player will begin to play the tracks in the order that |
, |
you selected.
Insert a | Press the cassette Play ( ) | To advance or rewind the tape | ||
into the slots in the Cassette Door | Button 1 to begin playback. | rapidly, press either the cassette | ||
with the open end facing up and | Adjust the VOLUME 2 | Fast Forward ( | ) | 1 or |
the full reel on the right side. Close |
| Rewind ( ) 2 | button. When | |
the cassette door. |
| you reach the desired point, press | ||
|
| the cassette play ( | ) Button | |
|
| 3 to resume normal playback. | ||
7 |
8 |
9 |
To pause playback momentarily , |
| To stop playback before the tape |
| When the tape reachs the end, | |
press the cassette Pause ( ) |
| ends, press the Stop/Eject |
| the | |
Button. The tape movement |
| ( | ) Button. The Play Button |
| activates, the tape PLAY Button |
stops but the tape motor is still |
| is release and the tape motor |
| is release and the tape motor | |
running . Press the cassette Pause |
| shuts off. |
| shuts off. Press the Stop/Eject | |
( ) Button again to release |
|
|
|
| ( ) Button to open the |
Pause and resume normal |
|
|
|
| Cassette Door and remove the |
playback . |
|
|
|
| tape. |
|
|
|
|
|
|
