camera.
Push and release inserted card if you wish to remove or replace the card.
Turn your camcorder OFF before inserting / removing the SD Card.
- Note that the SD Card has a tiny LOCK switch on the side. Set the switch to un-LOCK position to be able to store recorded videos, still pictures on inserted SD Memory Card.
2.4 Power on/off
In power-off state, press and hold the power key to power on the camera. In power-on state, press the power key to power off the camera.
In power-on state, let the camera idle for 1 minute（default）to power off the camera automatically.
In power-on state, when battery level is very low, the camera will turn off after several seconds. You must replace the batteries.
2.5 Setup menu | | |
In power-off state, press and hold Shutter key | then press POWER key | turn on the |
camera, until enter set day and time mode, then press the Left/Right key to move the cursor,
8
