Curtis Mathes CM25101S, CM27101S owner manual Adjusting the Sound, Selecting stereo/SAP

C H A P T E R 6

Adjusting the Sound

Selecting stereo/SAP

The MTS(Multi-channel TV Sound) provides for an extra sound channel. So MTS feature allows you to improve your TV viewing with high fidelity stereo sound. SAP(Second Audio Program) is used to transmit a second language of other audio information. If your TV receives a stereo sound (or SAP) broadcast, when the TV is turned on, select another channel or press the RECALL button on the remote control until the word “Stereo”(or “SAP”) is displayed on the screen.

Listening to stereo sound

1With the TV turned on, press the MENU button until “Audio” menu is displayed.

2Use the WCHV buttons select “Audio Mode” item.

3Press the CVOLB buttons repeatedly until “Stereo” is displayed.

4Press the button twice or wait a few seconds to return to normal TV viewing.

5Your setting will remain intact until you change it. Your TV will then automatically reproduce either stereo or monaural sound, whichever is broadcast.

1~2

Audio

Audio Mode: Mono

Bass

Treble

Balance

3

Audio

Audio Mode: Stereo

Bass

Treble

Balance

Select Adjust Exit

Select Adjust Exit

Listening to second Language

1Follow steps 1~2 in “Listening to stereo sound” above.

2Press the CVOLB buttons repeatedly until “SAP” is displayed.

3Press the MENU button twice or wait a few seconds to return to normal TV viewing.

4If a SAP broadcast is received, you will hear only the second language from the speaker.

Audio

Audio Mode:		SAP
Bass
Treble
Balance
Select	Adjust		Exit

Chapter 6 : Adjusting the Sound 25