16Installing the VoIP Loudspeaker Amplifier Configure the Loudspeaker Amplifier Parameters

2.3.2Configure the Network Parameters

1.Click the Network Setup button to open the Network Setup page (Figure 2-10).

Figure 2-10. Network Setup Page

2. On the Network Setup page, enter values for the parameters indicated in Table 2-9.

 

Table 2-9. Network Setup Parameters

 

 

Web Page Item

Description

 

 

IP Addressing*

Select either DHCP IP Addressing or Static IP Addressing by

 

marking the appropriate radio button. If you select Static, configure

 

the remaining parameters indicated in Table 2-9. If you select DHCP,

 

go to Step 3.

 

 

IP Address*

Enter the static IP address.

 

 

Subnet Mask

Enter the Subnet Mask address.

 

 

Default Gateway

Enter the Default Gateway address.

 

 

DNS Server 1*

Enter the DNS Server 1 address.

 

 

DNS Server 2*

Enter the DNS Server 2 address.

 

 

 

Click this button to save your configuration settings. Changing a

 

parameter that has an asterisk next to it will cause a system reboot

 

when saved.

 

 

CyberData Corporation

930106D

VoIP Loudspeaker Amplifier Operations Guide