| Installing the VoIP Loudspeaker Amplifier 19 | |
| Configure the Loudspeaker Amplifier Parameters | |
Table | ||
|
|
|
Web Page Item | Description |
|
|
|
|
RTFM Announcementa | Enable/Disable the speaker tone (beep) and audio | |
| associated with the RTFM switch. | |
Click on this button to save your configuration settings. Changing a parameter that has an asterisk next to it will cause a system reboot when saved.
Click on this button to do an audio test. Generates a voice message for testing the speaker audio quality and volume.
Link to the Network Setup page.
Link to the SIP Setup page.
Link to the MGROUPS Setup page.
Link to the Upgrade Firmware page.
Link to the Home Page page.
a.If you select No for RTFM Announcement, you will not hear a beep or associated RTFM audio. However, the return to default settings function remains active. If you wish to return to default settings, hold the RTFM button at least 20 seconds, then release the button.
3.After changing the parameters, click Save Settings.
2.3.4Configure the SIP Parameters
1.Click SIP Setup to open the SIP Setup page (Figure
Note For specific server configurations, go to the following URL:
http://www.CyberData.net/support/voip
VoIP Loudspeaker Amplifier Operations Guide | 930106D | CyberData Corporation |