CyberPower K01-0000083-00 user manual Model List, Package Contents, PDU Naming Convention

Model List:

Basic Series:

PDU20BHVT8RPDU20BHVIEC8R

PDU20BHVT10RPDU20BHVIEC10R

PDU20BHVT12RPDU20BHVIEC12R

PDU20BHVIEC12Ra

PDU30BT8F8RPDU30BHVT8R

PDU30BT10F10RPDU30BHVT10R PDU30BHVT12R

Package Contents

PDU (1)	Cord Retention Tray
	(1/2/3/4 pcs - varies by model)

Basic Series (0U):

PDU10BVHVIEC16F

PDU10BVHVIEC20F

PDU20BVHVT16FPDU20BVHVIEC16F

PDU20BVHVT20FPDU20BVHVIEC20F

PDU20BVHVT24FPDU20BVHVIEC24F

PDU20BVHVT32FPDU20BVHVIEC32F

PDU20BVHVT38FPDU20BVHVIEC38F

PDU30BVT14FPDU30BVHVT16F

PDU30BVT16FPDU30BVHVT20F

PDU30BVT20FPDU30BVHVT32F

PDU30BVT28FPDU30BVHVT38F PDU30BVT32F

Metered Series (0U):

PDU20MVHVT20FPDU20MVHVIEC24F

PDU20MVHVT30FPDU20MVHVIEC30F

PDU20MVHVT38FPDU20MVHVIEC38F

PDU30MVT24FPDU30MVHVT20F

PDU30MVT32FPDU30MVHVT30F PDU30MVHVT38F

Mounting Brackets

Horizontal Installation

Used (1 set)	Vertical Installation
	Used (1 set)

Bracket Mounting

Screws M4 X 8 (4pcs)

Keyhole Mounting Pegs (2pcs) with Screws M4 X 8 (2pcs) (for 0U models only)

Ground Screw M5 X 6 (1 pcs)

Vertical Mounting Brackets (1 set) (for 0U models only)

Cord Retention Tray

Mounting Screws M3 X 6

(4/8/12/16 pcs - varies by model)

Cord Retainer Clips (8/10/12/14/16/

20/24/30/32/38 pcs - varies by model)

for Cord Retention Tray

PDU Naming Convention:

	PDU	XX		M V HV			T	F		R	NET
		1		2	3	4	5	6	7		8
1.	Amperage:		Amperage – 15A, 20A, 30A
2.	Series:		B: =Basic				M: =Metered
			SW: = Switched
3.	Rack Space:		NULL: =Horizontal						V:= Vertical

4.Input Voltage: NULL: =120V HV:= High Voltage – 200V to 230V

5. Plug Type: NULL: =NEMA 5-15P / 5-20P

T:= Twist (NEMA L5-L6 Plug) IEC:= (IEC C14/C20)

6.Outlet Number Front Number of Outlets followed by F – Example 8F

7.Outlet Number Rear Number of Outlets followed by R – Example 8R

8.Network Management NET

1 For information on Cyberpower products, visit www.CPSww.com

Documentation:
		User	n	Product
			Unit
			Ma ual
			Pbower
		Distri ution		Registration
				Card
	User Manual			Product Registration Card
	Before using, please check to ensure the package contains all the
	items shown above. If there are missing parts please contact
Check	CyberPower technical support at www.CPSww.com or call 1-877-
	297-6937.

Safety Precautions -

Read the following before installing or operating the Power Distribution Unit (PDU):

1.Use only the supplied hardware to attach the mounting brackets.

2.The PDU must only be plugged into a three-wire, grounded outlet on a circuit protected by a fuse or circuit breaker. Connection to any other type of power outlet may result in a shock hazard.

3.Do not use extension cords or adapters with this PDU.

4.Never install a PDU, or associated wiring or equipment, during a lightning storm.

5.Check that the power cord, plug, and socket are in good condition.

6.The socket-outlet shall be installed near the equipment and shall be easily accessible.

7.CAUTION! To prevent the risk of fire or electric shock, this PDU should be installed in a temperature and humidity controlled indoor area free of conductive contaminants. Do not install this PDU where excessive moisture or heat is present..

For information on Cyberpower products, visit www.CPSww.com 2