CyberPower Systems BP240V30ART3U user manual Maintenance, Remove the front panels, Cover itself

Models: BP240V30ART3U

1 12
Download 12 pages 12 Kb
Page 8
Image 8

MAINTENANCE

Storage

To store your UPS for an extended period, cover it and store with the battery fully charged. Recharge the battery every three months to ensure battery life.

Battery Replacement

Please read and follow the Safety Instructions before servicing the battery. Battery replacement should be performed by trained personnel who are familiar with the procedures and safety precautions. Make a note of the replacement Battery module number.

Safety Precautions

CAUTION! Only use replacement batteries which are certified by CyberPower Systems. Use of incorrect battery type is an electrical hazard that could lead to explosion, fire, electric shock, or short circuit.

CAUTION! Batteries contain an electrical charge that can cause severe burns. Before servicing batteries, please remove any conductive materials such as jewelry, chains, wrist watches, and rings.

CAUTION! Do not open or mutilate the batteries. Electrolyte fluid is harmful to the skin/eyes and may be toxic.

CAUTION! To avoid electric shock, turn off and unplug the Battery module from the wall receptacle before servicing the battery.

CAUTION! Only use tools with insulated handles. Do not lay tools or metal parts on top of the UPS or battery terminals.

Replacement Batteries

Please refer to the front side of the Battery module for the model number of the correct replacement batteries. For battery procurement, log onto www.CPSww.com, or contact your local dealer.

Battery Disposal

Batteries are considered hazardous waste and must be disposed of properly. Contact your local government for more information about proper disposal and recycling of batteries. Do not dispose of batteries in fire.

Battery Installation

Step 1: Remove the front panels

Step 2: Remove the retaining screws from

 

the cable protection cover and then remove

 

the cover itself

Step 3: Pull the battery trays out slowly and then put the new battery trays back into the compartment

Step 4: Insert the battery connectors and tighten the screws of battery retaining cover

Step 5: Install the front panels

7

Copyright © 2011 CyberPower Systems, Inc.

Page 8
Image 8
CyberPower Systems BP240V30ART3U user manual Maintenance, Remove the front panels, Cover itself