CyberPower Systems Power Supply System CONFIGURE THE BATTERY BACKUP SETTINGS AND PERFORM DIAGNOSTICS

PowerPanel® Business Edition

CONFIGURE THE BATTERY BACKUP SETTINGS AND

PERFORM DIAGNOSTICS [AGENT ONLY]

• Configure the Battery Backup

• Run Diagnostics on the Battery Backup

Input

• *Conditions to use battery power: Sets the thresholds to use battery

power according to utility power voltage and utility power frequency. If the

threshold settings below are met, the Battery Backup will use battery power.

Note: This setting comes into effect after restarting Battery Backup.

o Utility voltage is below a voltage or above another voltage:

Sets the low voltage and high voltage threshold. Beyond the

thresholds the Battery Backup will supply battery power.

o Utility frequency is below a frequency or above another

frequency: Sets the low frequency and high frequency threshold.

Beyond the thresholds the Battery Backup will supply battery power.

• *Condition to bypass: Sets the threshold to enter bypass mode according

to utility power voltage.

o Utility voltage is below a voltage or above another voltage:

Sets the low voltage and high voltage threshold. Beyond the

thresholds the Battery Backup will switch to bypass mode.

Output

• *The Battery Backup supplies a voltage: Sets the output power voltage

supplied to the connected equipment. For some models, like the Paragon

Tower Battery Backup and the Professional Rack Mount Battery Backup, this

setting comes into effect after restarting the Battery Backup. For Paragon

Tower Battery Backup model, it is configurable only if the Battery Backup is

in bypass mode.

• *The Battery Backup supplies power of a voltage during battery

mode: Sets the output power voltage supplied to the connected equipment

during battery mode.

• *Outlet number: Sets the standalone outlet's turn on/off parameters.

o Turn off if battery capacity is below a percentage: Sets the low

limit of battery capacity to turn off this outlet.