CyberPower Systems Power Supply System

PowerPanel® Business Edition

overloaded

Battery-test failure The battery-test failed to provide battery power normally.

Batteries are not

present Batteries are not present; the Battery Backup cannot

provide battery power in this condition.

Batteries need to be

replaced Batteries may not work well any more; they need to be

replaced with new ones.

Communication lost Communication with device has been lost.

Communication

cannot establish Communication cannot establish during startup.

Information

Remaining runtime

is insufficient This event will occur when the battery is fully charged

and the remaining runtime is still less than sum of times

set in the following categories:

• Event Utility power failure and Low Battery

shutdown action delay time.

• Event Shutdown is initiated command file

execution time.

• OS shutdown time.

• All connected Slave OS shutdown time.

• Plus an additional 30 seconds.

You need to unload some equipment connected to

the Battery Backup to get more remaining runtime.

Please make sure all connected equipment will have

enough remaining runtime when power problem

occurs.

Shutdown initiated Shutdown process initiated.

A schedule has

initiated A schedule has initiated, the system could be shutdown.

This event occurs when any one of following things

happens:

• The schedule setup controlled outlet to Whole

outlet.

• The Battery Backup support standalone outlet

control and the schedule setup controlled outlet to

Outlet#1 or Outlet2 and enable Shutdown OS.

Enters bypass mode

Enters bypass mode for power supply, battery power will

no longer be provided.