CHAPTER 3: indooR CyClE AssEmbly
Attach Stabilizer Feet
Rear stabilizer A | Front stabilizer B |
A Rear stabilizer
A
B Front stabilizer
1.Note the difference between the front and rear stabilizers. The larger stabilizer with wheels goes in the rear of the indoor cycle (under the flywheel).
Attach handlebar
2.Attach the rear stabilizer to the rear of the main frame with four 5mm stabilizer bolts and stabilizer washers using the 5mm Allen wrench. Tighten the inner bolts first, and then proceed to the outer bolts to ensure the foot is secured prop- erly and evenly.
3.Attach the front stabilizer to the front of the main frame with four 5mm stabi- lizer bolts and stabilizer washers using the 5mm Allen wrench. Tighten the inner bolts first, and then proceed to the outer bolts to ensure the foot is secured properly and evenly.
Handlebar
| Handlebar post D | |
C | M | |
Main frame | ||
| ||
assembly | Large L | |
| ||
| handle |
Water bottle spacer
Water bottle holder
1.Remove 6mm bolt in main frame as- sembly using 6mm Allen wrench. The 6mm bolt can be kept in place of the large L handle for a more permanent placement of the handlebar height.
2.Insert the handlebar post into the head tube and secure it by inserting the large L handle into the main frame assembly on the right side of the indoor cycle (chain guard side).
3.Slide the water bottle holder and water bottle spacer onto the road style handle- bar.
Handlebar
Water bottle spacer
Water bottle holder
Handlebar post
Handlebar
End cap
Small L handle
4.Secure the water bottle holder and handlebar together using the previously removed, two 4mm spacer bolts and washers, on the underside of the handle- bar.
5. Carefully slide the road style handlebar assembly onto the handlebar post. Secure the plastic end cap to the handlebar post using two end cap screws with the Phillips screwdriver side of the 6mm Allen wrench.
6.Once the road style handlebar is in place, secure it with the small L handle on the right side of the indoor cycle (chain
guard side). | 3 |
|
