Cypress CY7C150 Maximum Ratings, Electrical Characteristics Over the Operating Range[2], Operating Range, Capacitance[4], AC Test Loads and Waveforms

CY7C150

Maximum Ratings

(Above which the useful life may be impaired. For user guide- lines, not tested.)

Storage Temperature ......................................	− 65° C to+150° C
Ambient Temperature with	− 55° C to+125° C
Power Applied...................................................
Supply Voltage to..................................................Ground Potential	− 0.5V to+7.0V
(Pin 24 to Pin 12)
DC Voltage Applied......................................................to Outputs	− 0.5V to+7.0V
in High Z State
DC Input Voltage .................................................	− 3.0V to +7.0V
Output Current into Outputs (LOW) .............................	20 mA

Electrical Characteristics Over the Operating Range[2]

Static Discharge Voltage ..........................................	>2001V
(per MIL-STD-883, Method 3015)
Latch-Up Current....................................................	>200 mA

Operating Range

	Ambient
Range	Temperature	VCC
Commercial	0° C to +70° C	5V ±	10%
Military[1]	− 55° C to +125° C	5V ±	10%

Note:

1.TA is the “instant on” case temperature.

								7C150
	Parameter	Description			Test Conditions					Unit
								Min.	Max.
VOH		Output HIGH Voltage	VCC = Min., IOH = −			0.4 mA		2.4		V
VOL		Output LOW Current	VCC = Min., IOL = 12 mA						0.4	V
VIH		Input HIGH Level						2.0	VCC	V
VIL		Input LOW Level						− 3.0	0.8	V
IIX		Input Load Current	GND < VI < VCC					− 10	+10	∝ A
IOZ		Output Current (High Z)	VOL < VOUT < VOH,					− 50	+50	∝ A
			Output Disabled
I	OS	Output Short Circuit Current[3]	V	CC	= Max., V	= GND			− 300	mA
					OUT
ICC		VCC Operating Supply Current	VCC = Max.,				Commercial		90	mA
			IOUT = 0 mA
							Military		100	mA

Notes:

2.See the last page of this specification for Group A subgroup testing information.

3.Not more than 1 output should be shorted at a time. Duration of the short circuit should not exceed 30 seconds.

Capacitance[4]

Parameter	Description	Test Conditions	Max.	Unit
CIN	Input Capacitance	TA = 25° C, f = 1 MHz,	10	pF
		VCC = 5.0V
COUT	Output Capacitance		10	pF

Note:

4.Tested initially and after any design or process changes that may affect these parameters.

AC Test Loads and Waveforms

5V

R1329Ω

5V

R1329Ω

ALL INPUT PULSES

OUTPUT

R2

OUTPUT

R2

3.0V

90%

30 pF

5 pF

10%

90%

10%

INCLUDING

202Ω

INCLUDING

202Ω

GND

< 3 ns

< 3 ns

JIG AND

JIG AND

SCOPE

(a)

SCOPE

(b)

C150–3

C150–4

Equivalent to:

THÉ VENIN EQUIVALENT

125Ω

OUTPUT

1.9V

Document #: 38-05024 Rev. ** Page 2 of 11