To power the access point, you can use one of the following methods:
1.Use the supplied power adapter
2.Connect one end of your Ethernet cable into the LAN (PoE) port on the
To setup and manage the
1.Connect a straight through Ethernet cable between the access point and your computer.
2.Connect the access point to a switch or router and use a computer from a computer that is also connected to that switch or router.
3.Please start your web browser program, type the IP address of the device (http:// 192.168.0.50) and press Enter. Make sure that the IP addresses of the device and your computer are in the same subnet. Then, refer to the Manual for configuration.
