D-Link DCS-7110 manual Configuration



Configuration

Insert the DCS-7110 CD into your computer's CD-ROM drive to begin the installation. If the Autorun function on your computer is disabled, or if the D-Link Launcher fails to start automatically, click Start > Run. Type D:\autorun.exe, where D: represents the drive letter of your CD-ROM drive.

Click Setup Wizard to begin the installation.

After clicking Setup Wizard, the following window will open. Click Next to continue.

Click Yes to accept the License Agreement.

Select the location to install the Wizard and click Next to continue.

Note: The installation may take several minutes to finish.

6 D-Link DCS-7110 Quick Installation Guide