D-Link DCS-7110 Cable Connections

D-Link DCS-7110 Quick Installation Guide

Basic Connection (without PoE)

1. Connect the camera to your switch or router via Ethernet cable.

2. Connect the power cable from the camera to the supplied power adapter.

3. Connect the supplied power adapter to a power outlet.

Power over Ethernet (PoE) Connection

If using a PoE switch or router, connect the network camera via Ethernet cable. PoE will transmit

both power and data over a single cable.

Note: Once power has been established, the LED will turn red. When the device has obtained

an IP address and is accessible, the LED will turn green.

Cable Connections