DE-528CT Ethernet Adapter / User s Guide
5
CONFIGURATION AND
DIAGNOSTICS
The DE-528CT adapter will be automatically configured when the computer is powered on.
Run the SETUP.EXE configuration and diagnostics program to verify configuration of the DE-528CT as set by the installation procedure, and assist with isolation of any faults in operation. These procedures are optional, and will only be useful in the unusual event that there is a fault, such as an interrupt number conflict among your computer s expansion cards. If your installation provides normal operation, you might choose to skip these procedures.
Starting the Setup and Diagnostic Program
Insert the DE-528CT Installation program diskette in an available diskette drive (here shown as drive A). At the DOS prompt (here shown as > ), key in:
> A : SETUP and press Enter
The Main Menu dialog box appears.
Then follow the instructions on the screen. Note that you can get help or quit the Setup and Diagnostics program at any time by pressing F1 or Esc respectively.
