10/100 NWay Ethernet/Fast Ethernet Switch User’s Guide
Figure 2.2 Installing the 10/100 NWay Ethernet/Fast Ethernet Switch in an equipment rack
Power on
The Switch can be used with AC power sources 100 - 240 VAC, 50 - 60 Hz. The power switch is located at the rear of the unit adjacent to the AC power connector. To turn the Switch on, press the power switch to the on or “1” position. The Switch’s power supply will adjust to the local power source automatically and may be turned on without having any or all LAN segment cables connected.
6 | Unpacking and Setup |
