DES-124F 4 Ports 100Base-FX Fiber Module
Figure 1-8. 4 port 100Base-TX/FX Front View
When installed into a DES-1200M , the DES-124F Module provides 4 x 100Mbps Fast Ethernet fiber ports which can be used to:
Connect the DES-1200M to the backbone of your network; that is, to a basement switch, hub or router.
Connector the DES-1200M to a 100Mbps server or end station.
An ST (or SC) connector provides the link to the multi-mode fiber cabling and three LEDs show five status of the Module at- a glance. A DIP-switch sets the operating mode to half duplex or full duplex (default).
Port 1
Full OFF | 1 2 3 4 | | | Half | ON |
| |
| |
| | |
uplexD | | | | Duplex | |
Figure 1-9. Location and setting duplex mode
10
