CHAPTER 4. MODULE INSTALLATION AND REMOVAL

WARNING

Before installing the Modules into the DES-1200M, you must disconnect the Switch from the main power supply.

Handling the Modules

The Module can be easily damaged by electrostatic discharge. To prevent damage, please observe the following:

Do not remove Modules from their packaging until you are ready to install it into a Switch.

Do not touch any of the pins, connections or components on the Modules.

Handle the Modules only by its edges and front panel.

Always wear an anti-static wristband connected to a suitable grounding point.

Always store or transport Modules in appropriate anti-static packaging.

Module Setup and Installation

1.Ensure that the DES-1200M is disconnected from the main power supply and that you are wearing an anti-static wrist- band connected to a suitable grounding point.

2.Place the DES-1200M on a flat surface. Using a small cross-bladed screwdriver, remove the blanking plate from the rear of the DES-1200M. Do not remove any other screws from the rear of the DES-1200M.

3.Keep the blanking plate and screws in a safe place. If you remove the Module at any time, you must replace the blanking plate to prevent dust and debris from entering the

25

Page 29
Image 29
D-Link DES-1200M manual Handling the Modules, Module Setup and Installation

DES-1200M specifications

The D-Link DES-1200M is a cost-effective and efficient solution designed for small to medium-sized businesses requiring reliable network performance. This 12-port Managed Ethernet switch offers a blend of performance and functionality, making it an essential component for robust network infrastructure.

One of the main features of the DES-1200M is its 12 10/100 Mbps Fast Ethernet ports. This ensures adequate data transfer rates needed for everyday networking tasks. The switch supports both store-and-forward switching and wire-speed forwarding, enhancing the overall network performance while minimizing packet loss.

In terms of management capabilities, the DES-1200M provides a web-based graphical interface and Simple Network Management Protocol (SNMP) support. This allows administrators to efficiently monitor and configure the switch settings, ensuring optimal performance and security. The switch also offers port mirroring and network monitoring features, assisting in troubleshooting and performance optimization.

Another standout feature is the support for VLANs, specifically 802.1Q tagging. This technology enables the segmentation of networks into logical groups, improving both security and performance by reducing broadcast traffic. In addition, the DES-1200M supports link aggregation, which allows multiple ports to work together, increasing bandwidth and providing redundancy in case of link failures.

Security is a crucial aspect, and the D-Link DES-1200M doesn't disappoint. It includes features such as IEEE 802.1X port-based network access control, which restricts access to authenticated users only, thus enhancing network security. The switch also supports port security, allowing network administrators to limit the number of MAC addresses that can be connected to each port.

Power over Ethernet (PoE) support further adds to the switch’s utility. By providing power to connected devices such as IP cameras and access points through the Ethernet cable, the DES-1200M eliminates the need for additional power sources, simplifying installation and reducing clutter.

Finally, the D-Link DES-1200M is designed with a sturdy metal chassis that ensures durability and reliability. Its compact design also allows for efficient space utilization, making it a practical choice for various deployment environments.

In summary, the D-Link DES-1200M managed switch offers excellent performance, extensive management features, robust security options, and PoE capabilities. This combination makes it an ideal choice for businesses looking to enhance their network infrastructure while maintaining cost-effectiveness.