Manuals / D-Link / Computer Equipment / Switch

D-Link DES-3225G manual IP Configuration screen

Models: DES-3225G

1 175
Download 175 pages 12 Kb
Page 45
Image 45

24-port NWay Ethernet Switch User’s Guide

Figure 6-9. IP Configuration screen

The fields listed under the Current Settings heading are those that are currently being used by the Switch. Those fields listed under Restart Settings will be used after the Switch has been Reset. Fields that can be set include:

♦Assign IP Determines whether the Switch should get its IP Address settings from the user (Manual), a BOOTP server, or a DHCP server. If Manual is chosen, the Switch will use the IP Address, Subnet Mask and Default Gateway settings defined in this screen upon being rebooted. If BOOTP is chosen, the Switch will send out a BOOTP broadcast request when it is powered up. The BOOTP protocol allows IP addresses, network masks, and default gateways to be assigned by a central BOOTP server. If this option is set, the Switch will first look for a BOOTP server to provide it with this information before using the supplied settings. If DHCP is chosen, a Dynamic Host Configuration Protocol request will be sent when the Switch is powered up.

♦IP Address Determines the IP address used by the Switch for receiving SNMP and Telnet communications. These fields should be of the form xxx.xxx.xxx.xxx, where each xxx is a number (represented in decimal) between 0 and 255. This address should be a unique address on a network assigned to you by the central Internet authorities. The same IP address is shared by both the SLIP and Ethernet network interfaces.

♦Subnet Mask Bitmask that determines the extent of the subnet that the Switch is on. Should be of the form xxx.xxx.xxx.xxx, where each xxx is a number (represented in decimal) between 0 and 255. If no subnetting is being done, the value should be 255.0.0.0 for a Class A network, 255.255.0.0 for a Class B network, and 255.255.255.0 for a Class C network.

♦Default Gateway IP address that determines where frames with a destination outside the current subnet should be sent. This is usually the address of a router or a host acting as an IP gateway. If your network is not part of an internetwork, or you do not want the Switch to be accessible outside your local network, you can leave this field unchanged.

Using the Console Interface

35

Page 44 Page 46
Page 45
Image 45
D-Link DES-3225G manual IP Configuration screen
Page 44 Page 46

DES-3225G specifications

The D-Link DES-3225GF and DES-3225G are both robust Ethernet switches designed to meet the networking needs of small to medium-sized enterprises and organizations. These devices are part of D-Link's comprehensive range of unmanaged layer 2 switches, known for their reliability and ease of use.

The DES-3225GF features a total of 25 Ethernet ports, including 24 10/100Base-TX ports and 1 Gigabit SFP slot, while the DES-3225G also comes with 25 ports but includes 24 10/100/1000 Mbps copper ports. Both models support Auto-MDI/MDI-X for seamless connection setup without the need for crossover cables, simplifying the deployment process.

One of the standout features of these switches is their wire-speed performance that enables high-speed data transfers and efficient traffic management. Each port is designed to provide non-blocking switching, which ensures that the bandwidth is fully utilized without any packet loss. The switches support IEEE 802.3x flow control, which helps to manage data flow and prevent overflow during heavy traffic periods.

The DES-3225GF and DES-3225G offer users a simple yet efficient way to expand their network. With a plug-and-play design, they require minimal configuration, allowing for quick integration into existing network infrastructures. These switches are equipped with a durable chassis, ensuring they can withstand the rigors of a busy IT environment.

Both models boast energy-efficient technologies that comply with IEEE 802.3az, which helps in reducing power consumption during periods of inactivity. By detecting link status and adjusting power accordingly, these switches contribute to a more sustainable networking solution.

In terms of form factor, the DES-3225GF and DES-3225G are rack-mounted, making them suitable for integration into standard network cabinets. This design ensures that the devices can be efficiently managed alongside other network equipment.

For management and security, the switches support features such as VLAN tagging and port security, allowing network administrators to segment traffic and protect the network from unauthorized access. With their sturdy build, innovative features, and straightforward implementation, the D-Link DES-3225GF and DES-3225G are ideal choices for organizations looking to enhance their network performance while keeping costs manageable.