24-port NWay Ethernet Switch User’s Guide

Switching Technology

Another key development pushing the limits of Ethernet technology is in the field of switching technology. A switch bridges Ethernet packets at the MAC address level of the Ethernet protocol transmitting among connected Ethernet or fast Ethernet LAN segments.

Switching is a cost-effective way of increasing the total network capacity available to users on a local area network. A switch increases capacity and decreases network loading by making it possible for a local area network to be divided into different segments which don’t compete with each other for network transmission capacity, giving a decreased load on each.

The switch acts as a high-speed selective bridge between the individual segments. Traffic that needs to go from one segment to another (from one port to another) is automatically forwarded by the switch, without interfering with any other segments (ports). This allows the total network capacity to be multiplied, while still maintaining the same network cabling and adapter cards.

For Fast Ethernet or Gigabit Ethernet networks, a switch is an effective way of eliminating problems of chaining hubs beyond the “two-repeater limit.” A switch can be used to split parts of the network into different collision domains, for example, making it possible to expand your Fast Ethernet network beyond the 205-meter network diameter limit for 100BASE-TX networks. Switches supporting both traditional 10Mbps Ethernet and 100Mbps Fast Ethernet are also ideal for bridging between existing 10Mbps networks and new 100Mbps networks.

Switching LAN technology is a marked improvement over the previous generation of network bridges, which were characterized by higher latencies. Routers have also been used to segment local area networks, but the cost of a router and the setup and maintenance required make routers relatively impractical. Today’s switches are an ideal solution to most kinds of local area network congestion problems.

Features

The DES-3225G Switch was designed for easy installation and high performance in an environment where traffic on the network and the number of users increase continuously.

Switch features include:

Ports

♦24 high performance NWay ports all operating at 10/100 Mbps for connecting to end stations, servers, and hubs (22 MDI-X 10/100 Ethernet UTP ports and 2 MDI-II Uplink ports).

♦All ports can auto-negotiate (NWay) between 10Mbps/ 100Mbps, half-duplex or full duplex and flow control.

♦One optional rear panel slide-in module interface for a 1-port 1000BASE-SX Gigabit Ethernet module, a 1-port 1000BASE-LX Gigabit Ethernet module, or a 1-port 1000BASE-T Gigabit Ethernet module, for connecting to another switch.

♦One slide-in module interface in the front panel for 1 or 2 port 10/100M Ethernet connection. Three modules are available: 2 ports TX module, 2 ports FX MT-RJ type module, and 1 port FX SC type module.

♦RS-232 DCE Diagnostic port (console port) for setting up and managing the Switch via a connection to a console terminal or PC using a terminal emulation program.

2

Introduction

Page 11 Page 13
Page 12
Image 12
D-Link DES-3225G manual Switching Technology, Features, Ports
Page 11 Page 13

DES-3225G specifications

The D-Link DES-3225GF and DES-3225G are both robust Ethernet switches designed to meet the networking needs of small to medium-sized enterprises and organizations. These devices are part of D-Link's comprehensive range of unmanaged layer 2 switches, known for their reliability and ease of use.

The DES-3225GF features a total of 25 Ethernet ports, including 24 10/100Base-TX ports and 1 Gigabit SFP slot, while the DES-3225G also comes with 25 ports but includes 24 10/100/1000 Mbps copper ports. Both models support Auto-MDI/MDI-X for seamless connection setup without the need for crossover cables, simplifying the deployment process.

One of the standout features of these switches is their wire-speed performance that enables high-speed data transfers and efficient traffic management. Each port is designed to provide non-blocking switching, which ensures that the bandwidth is fully utilized without any packet loss. The switches support IEEE 802.3x flow control, which helps to manage data flow and prevent overflow during heavy traffic periods.

The DES-3225GF and DES-3225G offer users a simple yet efficient way to expand their network. With a plug-and-play design, they require minimal configuration, allowing for quick integration into existing network infrastructures. These switches are equipped with a durable chassis, ensuring they can withstand the rigors of a busy IT environment.

Both models boast energy-efficient technologies that comply with IEEE 802.3az, which helps in reducing power consumption during periods of inactivity. By detecting link status and adjusting power accordingly, these switches contribute to a more sustainable networking solution.

In terms of form factor, the DES-3225GF and DES-3225G are rack-mounted, making them suitable for integration into standard network cabinets. This design ensures that the devices can be efficiently managed alongside other network equipment.

For management and security, the switches support features such as VLAN tagging and port security, allowing network administrators to segment traffic and protect the network from unauthorized access. With their sturdy build, innovative features, and straightforward implementation, the D-Link DES-3225GF and DES-3225G are ideal choices for organizations looking to enhance their network performance while keeping costs manageable.
Top Page Image Contents