D-Link DES-810, DES-818 manual Network Configuration Examples, Setting the Duplex Mode

switch up. To set for half-duplex, set the duplex switch down. To set either or both ports 1 and 2 to auto duplex mode detect, set the corresponding switch down.

Figure 6 Setting the Duplex Mode

Note:	Full-duplex	mode	can	only be	used for
	connections	to	other	switches,	network
	servers, or network stations.

Connections to hubs must use half-duplex mode only.

Network Configuration Examples

This section provides sample configurations showing ways you might use the 10/100 Fast Ethernet Switch.

18 Installation