Authentication key on both ends of a VPN
tunnel.
AH Transform
ng MD5
ou must select the exact same AH
f a VPN
This drop-down menu allows you to select the
authentication method that will be used when
AH is selected in the IPSec Operation drop-
down menu above.
You can choose between MD5 − usi
message digest authentication, and SHA −
using the SHA authentication method.
Y
authentication method on both ends o
tunnel.
AH Auth Key (ASCII) e predetermined alphanumeric AH
ll
.
ou must select the exact same AH
PN
Enter th
Authorization key. The length of the key wi
vary depending upon the choice of AH
Transform in the drop-down menu above
Y
Authorization key on both ends of a V
tunnel
Type p-down menu allows you to select the
al, only the Subnet type is
pported.
This dro
type of network definition for the range of IP
addresses on the remote LAN that will be
allowed to access the VPN. At the time of the
writing of this manu
su
Starting Target Host
N
In this
ase, the entire subnet of IP addresses from
allowed to
This is the first IP address of a subnet range of
IP addresses of computers on the remote LA
that will be allowed to access the VPN.
c
192.168.2.1 to 192.168.2.254 will be
access the VPN.
Note that the IP addresses192.168.2.0 and
192.168.2.255 are reserved for use on the
remote network.