PPoE Passthrough P
The DFL-600 allows you to pass PPPoE authentication and connection
packets to a PC on your LAN that will then make the connection using
appropriate software to give the server at your ISP the appropriate username
and password, if necessary.
Tools − System
The System Settings page allows you to save th
DFL-600’s Flash RAM (NVRAM). Clicking the Apply
configuration page will make the changes curren
Apply Settings and Restart from the System Settings
configuration into the DFL-600’s NVR
revert to the last saved configuration when it is restarted.
e current configuration to the
button on any given
t, but you must execute an
page to enter the
AM. If you do not, the DFL-600 will
ns for restarting the DFL-600 − save settings and restart,
tory default settings. If you choose the Restore Factory
There are two optio
r restart to the faco
Default Settings option, all of the configuration settings you have entered
will be erased and the DFL-600 will be restored to the same configuration it
had when it left the factory.