The NetWare server will now automatically load/bind the driver.
If the driver files have already been copied to your system’s Netware directory and you simply wish to load them:
1.Start the NetWare Server by typing in the following commands:
CD \NWSERVER
SERVER.
2.After booting up, type the following command:
NWCONFIG
3. Select "Driver Options" → "Configure network drivers" → "Select a driver".
4.Select "DLKGE.LAN ...." in the Select a driver windows.
5.Specify "SLOT" and "Node Address" if necessary.
6.Select "Save parameters and load driver" after configuring the adapter settings. The NetWare server will now automatically load/bind the driver.
Next, you will need to modify your NetWare 5.0 Server’s Autoexec file. To do so, please follow these steps:
1.Start the NetWare Server by typing in the following commands:
CD \NWSERVER
SERVER.
2.From the Novell Server side, type the following command:
NWCONFIG
3.Select <NCF files options>.
4.Select <Edit AUTOEXEC.NCF file>.
5.Add the following items into the server's AUTOEXEC.NCF file:
9
