Configuring the Switch | D-Link DGS-1216T manual

Exit: To exit the Web Management Utility.

In the “View TAB”, there are view log and clear log function, this function will help you to show trap setting.

View Log: To show the event of the Web Management Utility and the device.

Clear Log: to clear the log.

In the “Option TAB”, there are Refresh Time function, this function helps you to refresh the time of monitoring the device. Choose 15 secs, 30 secs, 1 min, 2 min and 5 min to select the time of monitoring.

In the “Help TAB”, there is About function, it will show out the version of the Web Management Utility.

Configuring the Switch

The DGS-1216T Web Smart Switch has a Web GUI interface for smart switch configuration. The Switch can be configured through the Web Browser. A network administrator can manage, control and monitor the switch from the local LAN. This section indicates how to configure the Switch to enable its smart functions including:

Port Setting (Speed/Disable, Duplex mode, Flow Control)

Virtual LAN Group setting (VLAN)

Port Trunking

Port Mirroring

QoS

Jumbo frame

Spanning Tree

SNMP

System Setting

Device status and Statistic

24

Image 30

D-Link DGS-1216T manual Configuring the Switch

Contents

LinkDGS-1216T Building Networks for PeoplePage Table of Content Page Technical Specifications Iii Page Purpose Terms/UsagePage Gigabit Ethernet Technology Introduction Fast Ethernet Technology Switching Technology Features Vlan Virtual Local Area NetworkPage Page Installation Unpacking Rack Mounting Attach the adhesive rubber pads to the bottom Connecting Network Cable AC PowerPage Gigabit Ethernet Ports Port 1~16 LED IndicatorFront Panel Mini Gbic Ports AC Power Connector ResetRear Panel Power and System LEDs Understanding LED Indicators Ports 1~16 Status LEDs Link/ACT Link/Activity Network, the Link/ACT LED lights on Installing the Web Management Utility Configuration Discovery List Web Management Utility Monitor List System word definitions in the Discovery ListSystem word definitions in the Monitor List Trap information Device Setting Configuration Setting Firmware upgrade Toolbar Configuring the Switch Login Setup Menu Device Status Setup menu Configuring Setup Setting Port Settings Speed/Disable Default PriorityFlow Control Page Vlan Settings Virtual Local Area Network Port VID Setting Trunk Setting Mirror Setting Ieee 802.1P QoS Setting Spanning Tree Setting Spanning Tree Setting Snmp Setting Traps MIBs Configure Snmp Community Snmp Community Setting Delete Snmp Community group Configure Snmp Trap Configure Snmp Trap Setting Delete Snmp Trap Jumbo Frame Setting Device Status Statistic Device statistic System Setting System setting Trap Setting Trap Setting Abnormal* 50 error packet count within 10 seconds Set Password Backup Setting Reset Setting Logout Logout Technical Specifications Performance Page Page Product Registration International Offices Registration Card All Countries and Regions Excluding USA