D-Link DGS-3024 - page 41

DGS-3024 Gigabit Ethernet Switch Manual

27

then to use those settings. The other options are 10M/Half, 10M/Full, 100M/Half

and 100M/Full, 1000M/Full_M and 1000M/Full_S. There is no automatic

adjustment of port settings with any option other than Auto.

The Switch allows the user to configure two types of gigabit connections;

1000M/Full_M and 1000M/Full_S. Gigabit connections are only supported in full

duplex connections and take on certain characteristics that are different from the

other choices listed.

The 1000M/Full_M (master) and 1000M/Full_S (slave) parameters refer to

connections running a 1000BASE-T cable for connection between the Switch port

and other device capable of a gigabit connection. The master setting

(1000M/Full_M) will allow the port to advertise capabilities related to duplex,

speed and physical layer type. The master setting will also determine the master

and slave relationship between the two connected physical layers. This

relationship is necessary for establishing the timing control between the two

physical layers. The timing control is set on a master physical layer by a local

source. The slave setting (1000M/Full_S) uses loop timing, where the timing

comes form a data stream received from the master. If one connection is set for

1000M/Full_M, the other side of the connection must be set for 1000M/Full_S.

Any other configuration will result in a link down status for both ports.

Flow Control Displays the flow control scheme used for the various port configurations. Ports

configured for full-duplex use 802.3x flow control, half-duplex ports use

backpressure flow control, and Auto ports use an automatic selection of the two.

The default is Disabled.

Learning Enable or disable MAC address learning for the selected ports. When Enabled,

destination and source MAC addresses are automatically listed in the forwarding

table. When learning is Disabled, MAC addresses must be manually entered into

the forwarding table. This is sometimes done for security or efficiency reasons.

See the section on Forwarding for information on entering MAC addresses into

the forwarding table. The default setting is Disabled.

Click Apply to implement the new settings on the Switch.

Contents

Main Manual Page Table of Contents Page Page Page Page Page Preface Intended Readers Notes, Notices, and Cautions Page Safety Instructions Page Safety Instructions (continued) Protecting Against Electrostatic Discharge Battery Handling Reminder Introduction Features Ports Performance Features Management Page Unpacking and Setup Packing List Installation Desktop or Shelf Installation Rack Installation Page Page Identifying External Components Front Panel Rear Panel Side Panels LED Indicators Connecting the Switch Switch to End Node Switch to Hub or Switch Switch to Core Router Switch Page Introduction to Switch Management Management Options Web-based Management Interface SNMP-Based Management Command Line Console Interface Through the Serial Port Page First Time Connecting to The Switch Password Protection SNMP Settings Traps MIBs IP Address Assignment Page Connecting Devices to the Switch Web-Based Network Management Introduction Login to Web Manager Web-based User Interface Areas of the User Interface Page Configuration IP Address Switch Information Advanced Settings Page Port Configuration Page Port Mirroring Link Aggregation (Port Trunking) Page IGMP Snooping IGMP Snooping Static Router Ports Entry Spanning Tree 802.1s MSTP 802.1w Rapid Spanning Tree Port Transition States Page Page MST Configuration Table Page Page MSTI Settings Page STP Instance Settings Page Page Page Page Forwarding Unicast Forwarding Multicast Forwarding VLANs Understanding IEEE 802.1p Priority VLAN Description Notes About VLANs on the DGS-3024 IEEE 802.1Q VLANs Page 802.1Q VLAN Tags Port VLAN ID Tagging and Untagging Ingress Filtering Default VLANs VLAN and Trunk Groups Static VLAN Entry Page 8021Q Port Settings Page SNTP Settings Time Setting Page Time Zone and DST QoS Advantages of QoS Understanding QoS Page Traffic Control 802.1p Default Priority 802.1p User Priority QoS Scheduling Mechanism QoS Output Scheduling MAC Notification MAC Notification Global Settings MAC Notification Port Settings Page System Log Server Page Port Access Entity 802.1x Port-Based Access Control Authentication Server Authenticator Client Authentication Process Port-Based Network Access Control Configure Authenticator Page Page Local users 802.1x Capability Settings Page Initialize Port(s) Reauthenticate Port(s) RADIUS Server Static ARP Settings Security Trusted Host Secure Socket Layer (SSL) Download Certificate Configuration Page Secure Shell (SSH) SSH Configuration Page SSH Algorithm Page SSH User Authentication Access Authentication Control Authentication Policy & Parameters Application Authentication Settings Authentication Server Group Page Authentication Server Host Login Method Lists Page Enable Method Lists Page Configure Local Enable Password Enable Admin Page Management User Accounts Admin and User Privileges SNMP Manager SNMP User Table SNMP View Table SNMP Group Table Page SNMP Community Table SNMP Host Table SNMP Engine ID Page Monitoring Port Utilization Packets Received (RX) Page Page Page Page Errors Page Page Transmitted (TX) Page Size Page MAC Address Page Switch History Log Page IGMP Snooping Group IGMP Snooping Forwarding VLAN Status Page Port Access Control Maintenance TFTP Services Download Firmware Download Configuration File Save Settings Ping Test Save Changes Reboot Services Reboot Reset Reset Config Reset System Logout Page A Technical Specifications Performance Physical and Environmental General B Cable Lengths C Glossary Page Page Warranty and Registration Information (All countries and regions excluding USA) Wichtige Sicherheitshinweise WARRANTIES EXCLUSIVE LIMITATION OF LIABILITY Limited Warranty Hardware: Software: Page Page Page Page Trademarks Copyright statement CE EMI class A warning D-Link Europe Limited Product Warranty General Terms Geographical Scope of the Limited Product Warranty Limitation of Product Warranty Limited Product Warranty Period Performance of the Limited Product Warranty Warrantor Product Type Product Warranty Period D-Link Europe Limited Produktgarantie Allgemeine Bedingungen Rumlicher Geltungsbereich der eingeschrnkten Garantie Einschrnkung der Garantie Laufzeit der eingeschrnkten Garantie Leistungsumfang der eingeschrnkten Garantie Garantiegeber Produkttyp Gewhrleistungslaufzeit D-Link Europe a limit la garantie des produits Conditions Gnrales Etendue gographique de la Garantie Produit Limite Limitation de la Garantie Produit Priode de Garantie Produit Limite Page Garanta limitada del producto D-LINK Europa Perodo de la garanta limitada del producto Condiciones generales Cobertura geogrfica de la garanta limitada del producto Limitacin de la garanta del producto Uso de la garanta limitada del producto Garante Tipo de producto Perodo de garanta del producto D-Link Europe Termini di Garanzia dei Prodotti Generalit Ambito geografico della Garanzia limitata Limitazione della Garanzia Periodo di garanzia Prestazioni della Garanzia limitata Garante Tipo de producto Perodo de garanta del producto Offices Registration Card (All Countries and Regions excluding USA) Product was purchased from: