Using the Configuration Menu
Advanced > Routing
Static routes can be added if you require specific routes within your internal network. These routes will not apply to the WAN (Internet) network.
Destination- | Enter in the IP of the specified network that you want to |
| access using the static route |
Subnet Mask- | Enter in the subnet mask to be used for the specified net |
| work. |
Gateway- | Enter in the gateway IP address to the specified network. |
Hop- | Enter in the amount of hops it will take to the specified |
| network. |
Enable- | Select this option for the specified static route to take effect. |
Hop Count - in a transmission path, each link is terminated at a network device such as a router or gateway. The number of hops equals the number of routers or
gateways that data must pass through before reaching the destination.
27
