Manuals / D-Link / Computer Equipment / Network Router

D-Link DIR-301 manual L2TP, Internet Setup, Connect Mode

Models: DIR-301

1 67

Download 67 pages 22.18 Kb

Page 22

L2TP

Section 3 - Configuration

Internet Setup

L2TP

Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a username and password. This option is typically used for DSL services.

L2TP: Select Dynamic (most common) or Static. Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses.

IP Address: Enter the IP address (Static L2TP only).

Subnet Mask: Enter the Primary and Secondary DNS Server Addresses (Static L2TP only).

Gateway: Enter the Gateway IP Address provided by your ISP.

DNS: The DNS server information will be supplied by your ISP (Internet Service Provider.)

Server IP: Enter the Server IP provided by your ISP (optional).

L2TP Account: Enter your L2TP account name.

L2TP Password: Enter your L2TP password and then retype the password in the next box.

Maximum Idle Enter a maximum idle time during which the Internet Time: connection is maintained during inactivity. To disable this

feature, enable Auto-reconnect.

MTU:

Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1492 is the default MTU.

Connect Mode:

Select either Always-on, Manual, or Connect-on demand.

D-Link DIR-301 User Manual

22

Image 22

D-Link DIR-301 manual L2TP, Internet Setup, Connect Mode

Contents

Page Installation Table of ContentsConfiguration Wireless Basics Wireless SecurityTroubleshooting Networking BasicsSystem Requirements ProductPackageOverviewContentsIntroduction Features Connections Hardware OverviewLAN Ports INTERNET LED Power LEDLEDs WLAN LEDInstallation Before you BeginWireless Installation Considerations Connect to Cable/DSL/Satellite Modem Connect to Another Router 6. Disconnect the Ethernet cable from the router and reconnect your computer to your network Configuration Web-based Configuration UtilitySetup Wizard Click Launch Internet Connection Setup Wizard to beginClick Next to continue Create a new password and then click Next to continueSection 3 - Configuration D-Link DIR-301 User ManualIf you selected Dynamic, you may need to enter the MAC address of the computer that was last connected directly to your modem. If you are currently using that computer, click Clone Your PC’s MAC Address and then click Next to continue If you selected L2TP, enter your L2TP username and password. Click Next to continue Dynamic IP Address Host Name Internet SetupDynamic Cable Clone MAC AddressInternet Setup PPPoE DSLSelect demand Maximum Idle PPTPInternet Setup Connect ModeInternet Setup L2TPConnect Mode Big Pond Internet SetupInternet Setup Static assigned by ISPAddress Wireless Settings Enable WirelessNetwork Settings DHCP Server Settings Port Forwarding Rules This will allow you to open a single port or a range of portsApplication Rules Network Filter DHCP ClientConfigure Website Select Turn Website Filtering OFF, Turn Website FilterFiltering ON and DENY computers access to ONLY these sites Firewall Settings DTIM Interval Advanced Wireless SettingsTX Rate CTS ModeAdvanced Network Settings User Password Administrator SettingsAdministrator Login Name Administrator Password IP Address PortTime Settings System Settings Firmware Upgrade System Check Device Information Last Page View the last page of the log Section 3 - ConfigurationFirst Page View the first page of the log Previous View the previous page Next View the next pageWireless Stats StatsSection 3 - Configuration SupportD-Link DIR-301 User Manual Wireless Security What is WEP?Configure WEP 2. Next to Security Mode, select Enable WEP SecurityWhat is WPA? 2. Next to Security Mode, select Enable WPA-Personal Security Configure WPA-PSKor Enable WPA2-Personal Security Configure WPA RADIUS Connect to a Wireless Network Using Windows XPConfigure WEP It is recommended to enable WEP on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the WEP key being usedPage Section 5 - Connecting to a Wireless Network Configure WPA-PSKD-Link DIR-301 User Manual WPA-PSK passphrase and click Connect 3. The Wireless Network Connection box will appear. Enter theSection 5 - Connecting to a Wireless Network D-Link DIR-301 User ManualTroubleshooting 1. Why can’t I access the web-based configuration utility?2. What can I do if I forgot my password? Note AOL DSL+ users must use MTU of Example ping yahoo.com -f -lTo change the MTU rate on your router follow the steps below Wireless Basics How does wireless work? What is Wireless?Why D-Link Wireless? Wireless Local Area Network WLANHome Who uses wireless?Wireless Personal Area Network WPAN Small Office and Home OfficeTips Where is wireless used?Centralize your router or Access Point Eliminate InterferenceWireless Modes SecurityNetworking Basics Check your IP addressStep Statically Assign an IP addressStep Windows XP - Click on Start Control Panel Network Connections Step Highlight Internet Protocol TCP/IP and click Properties StepWireless Frequency Range Technical SpecificationsWireless Signal Rates Wireless Transmit PowerSafety and Emissions Advanced Firewall FeaturesOperating Temperature 32F to 131F 0C to 55C Humidity DimensionsFor Customers within Canada Contacting Technical SupportFor Customers within The United Kingdom & Ireland D-Link UK & Ireland Technical Support over the Internet