Section 3 - Configuration

Internet Setup

PPTP

Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with a username and password. This option is typically used for DSL services.

 

PPTP: Select Dynamic (most common) or Static. Select

 

 

 

Static if your ISP assigned you the IP address, subnet

 

 

 

mask, gateway, and DNS server addresses.

 

 

IP Address: Enter the IP address (Static PPTP only).

 

Subnet Mask: Enter the Primary and Secondary DNS Server

 

 

 

Addresses (Static PPTP only).

 

 

Gateway: Enter the Gateway IP Address provided by your ISP.

 

 

DNS: The DNS server information will be supplied by your

 

 

 

ISP (Internet Service Provider.)

 

 

Server IP: Enter the Server IP provided by your ISP (optional).

 

PPTP Account: Enter your PPTP account name.

 

PPTP Password: Enter your PPTP password and then retype the

 

 

 

password in the next box.

 

Maximum Idle

Enter a maximum idle time during which the Internet

 

 

Time: connection is maintained during inactivity. To disable

 

 

 

this feature, enable Auto-reconnect.

 

 

MTU:

Maximum Transmission Unit - you may need to change

 

 

 

 

Connect Mode:

the MTU for optimal performance with your specific ISP. 1492 is the default MTU.

 

 

 

 

 

Select either Always-on, Manual, or Connect-on demand.

 

 

 

 

 

D-Link DIR-301 User Manual

21

Page 21
Image 21
D-Link DIR-301 manual Pptp