D-Link DIR-412 manual Network Filters, Dhcp Client Schedule

Section 3 - Configuration

Network Filters

Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from accessing the Network. You can either manually add a MAC address or select the MAC address from the list of clients that are currently connected to the Broadband Router.

Configure MAC Filtering:

MAC Address:

DHCP Client:

Schedule:

Select Turn MAC Filtering Off, Allow MAC addresses listed below, or Deny MAC addresses listed below from the drop-down menu.

Enter the MAC address you would like to filter.

To find the MAC address on a computer, please refer to the Networking Basics section in this manual.

Select a DHCP client from the drop-down menu and click

<<to copy the MAC Address from the DHCP client.

Select a schedule for when the Network Filter will be enabled. The user can click the New Schedule button to bring up the “Schedule Webpage” to configure a new schedule.

D-Link DIR-412 User Manual 47