D-Link DIR-412 manual Administrator Settings

Section 3 - Configuration

Administrator Settings

This page will allow you to change the Administrator and User passwords. You can also enable Remote Management. There are two accounts that can access the management interface through the web browser. The accounts are admin and user. Admin has read/write access while user has read-only access. User can only view the settings but cannot make any changes. Only the admin account has the ability to change both admin and user account passwords.

Admin Password:

Enable Graphical Authentication:

Enable Remote Management:

Remote Admin Port:

Enter and confirm a new password for the Administrator Login Name. The administrator can make changes to the settings.

Check this box to enable graphical authentication. The device supports this function to prevent phishing.

Remote management allows the DIR-412 to be configured from the Internet by a web browser. A username and password is still required to access the Web-Management interface. In general, only a member of your network can browse the built-in web pages to perform Administrator tasks. This feature enables you to perform Administrator tasks from the remote (Internet) host.

The port number used to access the DIR-412.

Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address of the DIR-412 and 8080 is the port used for the Web Management interface.

D-Link DIR-412 User Manual 54