LEDs, Wcn Led | D-Link DIR-68 manual

Section 1 - Product Overview

Status LED

A blinking light indicates that the DIR-628 is ready.

Hardware Overview

LEDs

WCN LED

Insert a USB flash drive with WCN information. The LED will blink 3 times if it successfully transfers the wireless settings.

Power LED

A solid light indicates a proper connection to the power supply.

WLAN LEDs

A solid light indicates that the wireless segment is ready. This LED blinks during wireless data transmission.

Local Network LEDs

A solid light indicates a connection to an Ethernet- enabled computer on ports 1-4. This LED blinks during data transmission.

D-Link DIR-628 User Manual

10

Image 10

D-Link DIR-68 manual LEDs, Wcn Led

Contents

Page Manual Revisions PrefaceTrademarks Table of Contents Technical Specifications Wireless SecurityTroubleshooting Wireless Basics Networking Basics ProductPackageOverviewContents System Requirements Browser Requirements Introduction Total Performance Features Hardware Overview Connections LEDs WCN LED Installation Before you Begin Wireless Installation Considerations Connect to Cable/DSL/Satellite Modem Turn on your computer Connect to Another Router Installation Getting Started Configuration Web-based Configuration Utility Setup Wizard Click Internet Connection Setup Wizard to begin Configuration Configuration Configuration Manual Configuration Dynamic Cable Internet Setup Connection Pptp Page L2TP Page Static assigned by ISP Wireless Settings Mode 2.4GHz Channel Scan Network Settings IP Address Subnet Mask Device Name Dhcp Server Settings Type Secondary Wins IP Address Dhcp Reservation ClientsPage Virtual Server Configuration Port Forwarding Application Rules Enable Traffic Traffic Shaping QoS Engine Classification Network Filters Access Control Access Control Wizard Access Control Wizard Website Filters Add Website Select Allow or Deny Filtering Rule Inbound Filters Firewall Settings Application Level Gateway Configuration Routing Advanced Wireless Settings Wi-Fi Protected Setup Default Device Wizard UPnP Advanced Network SettingsInbound Filter Administrator Settings Time Settings SysLog Check this box to send the router logs to a SysLog Server Account Name Password On Log Full On Schedule Email SettingsEnable Email Notification From Email Address Smtp Server Address System Settings File name for the settings Update Firmware Ddns System Check Schedules Device Information Log Apply Log Settings RefreshSave Log Stats Internet Sessions Page Wireless Support Wireless Security What is WPA? Wireless Security Setup Wizard Launch Wireless Security Setup Wizard If you selected Manually, the following screen will appear Add Wireless Device with WPS Wizard Configure WPA-Personal PSK Configure WPA-Enterprise Radius Security Connect to a Wireless Network Using Windows Vista Configure Wireless Security Security Connect Using WCN 2.0 in Windows Vista Using Windows XP Configure WPA-PSK Connecting to a Wireless Network Troubleshooting Why can’t I access the web-based configuration utility? What can I do if I forgot my password? Troubleshooting Troubleshooting Wireless Basics Wireless Local Area Network Wlan Wireless Personal Area Network Wpan Home Small Office and Home Office Eliminate Interference Centralize your router or Access PointSecurity Wireless Modes Networking Basics Check your IP address Step Step Highlight Internet Protocol TCP/IP and click Properties Technical Specifications Wireless Signal Rates1 Ieee 802.11n draft 2.0 HT20/HT40 FCC Statement CE Mark WarningFCC Caution IC statement IC Radiation Exposure Statement