Section 3 - Configuration
Enable Auto The Auto Channel Scan setting can be selected to allow the DIR-628 to choose the channel with the least amount of interference.
Channel Scan:
Wireless Channel: Indicates the channel setting for the DIR-628. By default the channel is set to 6. The Channel can be changed to fit the channel setting for an existing wireless network or to customize the wireless network. If you enable Auto Channel Scan, this option will be greyed out.
Transmission Rate: Select the transmit rate. It is strongly suggested to select Best (Auto) for best performance.
Channel Width: Select the Channel Width:
Auto 20/40 - Select if you are using both 802.11n and non-802.11n wireless devices. 20MHz - Select if you are not using any 802.11n wireless clients. This is the default setting.
Visibility Status: Select Invisible if you do not want the SSID of your wireless network to be broadcasted by the DIR-628. If Invisible is selected, the SSID of the DIR-628 will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DIR-628 in order to connect to it.
Wireless Security: Refer to page 71 for more information regarding wireless security.
D-Link DIR-628 User Manual | 30 |
