D-Link DWA-160 manual Troubleshooting, SET-UP and Configuration Problems

ENGLISH

TROUBLESHOOTING

SET-UP AND CONFIGURATION PROBLEMS

1.If I’ve lost my CD what can I do?

The CD contains software drivers and manual which can be obtained from D-Link (see Technical Support below). Windows 7, XP, Vista in most cases will automatically install the correct drivers.

2.If I’ve forgotten my wireless encryption key?

The wireless encryption key is configured at the Wireless Access Point, Router or DSL Modem Router. If you are unable to obtain your encryption key, the only solution would be to re-configure your Access Point/Router to use a new encryption key. Please contact your Wireless Access Point/Router/DSL Modem Router manufacturer.

3.Why can’t I get a wireless connection?

-Check that your DWA-160 is plugged in properly to the USB port or try to plug the DWA-160 into another USB port if available.

-The LED on the DWA-160 should be lit, otherwise there could be a physical fault on the USB port or the driver is not installed properly.

-Ensure that the wireless settings on the DWA-160 match the settings on your Access Point/ Router. Please check and confirm your settings for.

Wireless Network Name (SSID)

Wireless Encryption Key

Wireless Security Method (E.g. WEP, WPA2)

To check whether a Wireless connection has been made, in the Windows System Tray (bottom right). Red means no valid connections have been made.

-Check that your Internet is working fine on existing computers.

-Ensure that you have followed and completed the software installation process, otherwise, please re-install the software. The LED on the DWA-160 should come on after software installation.

4.Which Operating Systems does the DWA-160 support?

The DWA-160 support all popular Operating Systems including Microsoft Windows XP(64/32 bit)/ Vista/Windows 7.

Note: If you are unable to connect, see the Troubleshooting chapter of the product manual in the D-Link DWA-160 XTREME N™ DUAL BAND USB ADAPTER

4 DWA-160