D-Link DWL-2000AP manual Wireless Client mode

Using the Configuration Menu (continued)

Advanced > Mode (continued)

Enter the MAC address

to configure the Wireless Client and the Wireless Bridge modes

Wireless Client mode Wireless Bridge mode

When using the DWL-2000AP in Wireless Client mode, you will enter the MAC address of the Remote AP.

When using the DWL-2000AP in Wireless Bridge mode, you will enter the MAC address of the Remote Bridge.

Find the MAC address of the DWL-2000AP that is acting as a Remote Access Point or a Remote Bridge, by going to Status > Device Info in the configuration utility of the remote DWL-2000AP. There you will find the MAC address as shown above.

MAC Address - Media Access Control Address

A unique hardware address that identifies a device on a network. It is assigned at the factory and cannot be changed. Usually you will find this address on a sticker on the device or packaging.

18