Getting Started

Please refer to the following sections of this manual for additional information about setting up a network:

Networking Basics - learn how to check and assign your IP Address; share printers and files.

Using the Configuration Menu - learn the settings for the DWL-6000AP, using the web-based interface.

Troubleshooting - learn how to check for common installation issues and other tips for troubleshooting.

1

2

3

4

5

6

Please remember that D-Link AirPro wireless devices are pre-configured to connect

together, right out of the box, with the default settings.

For a typical wireless setup at home (as shown above,)

please do the following:

You will need a broadband Internet access (Cable/DSL) subscription

Consult with your Cable/DSL provider for proper installation of the modem

Connect the modem to an Ethernet broadband router such as the DI-604(see the Quick Installation Guide included with the DI-604.)

Connect the router to the D-Link AirPro DWL-6000AP (see the Quick Installation Guide included with the DWL-6000AP.)

If you are connecting a desktop computer in your network, you can install the D-Link AirPro DWL-A520 wireless PCI adapter into an available PCI slot. (See the Quick Installation Guide included with the DWL-A520.)

Install the drivers for the wireless cardbus adapter (D-LinkAirPro DWL-A650) into the laptop computer (see the Quick Installation Guide included

with DWL-A650.)

12

Page 12
Image 12
D-Link DWL-6000AP manual Getting Started