D-Link DWL-G120 manual Setting up a Wireless Ad-Hoc Network, IP Address

Getting Started (continued)

Setting up a Wireless Ad-Hoc Network

D-Link AirPlusTM G DWL-G120

802.11g/2.4GHz Wireless USB Adaper

Install the DWL-G120Wireless USB adapter into the desktop computer. (See the Quick Installation Guide included with the product for installation instructions.)

Install another DWL-G120into the laptop computer. Or you may install another wireless adapter such as the D-Link DWL-G650 wireless PC Card adapter. (See the Quick Installation Guide included with the product for installation instructions.)

Set the wireless configuration for the adapters to Ad-Hocmode, set the adapters to the same channel, and assign an IP address to each computer on the Ad-Hoc network. (See Box below.)

IP Address

When assigning IP addresses to the computers on the network, please remember that the IP address for each computer must be in the same IP address range as all the computers in the network, and the subnet mask must be exactly the same for all the computers in the network.

For example: If the first computer is assigned an IP address of 192.168.0.2 with a subnet mask of 255.255.255.0, then the second computer can be assigned an IP address of 192.168.0.3 with a subnet mask of 255.255.255.0, etc.

IMPORTANT: If computers or other devices are assigned the same IP address, one or more of the devices may not be visible on the network.

12