D-Link VDI-624 manual On the next

Using the Configuration Menu (continued)

Please be sure to remove any

existing PPPoE client software

installed on your computers.

Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE con- nection. Your ISP will provide you with a username and pass- word. Select Dynamic PPPoE to obtain an IP address automatically for your PPPoE con- nection. Select Static PPPoE to use a static IP address for your PPPoE connection.

PPPoE-

User Name-

Retype Password-

Service Name-

IP Address-

Primary DNS

Address-

Secondary DNS

Address-

Home > WAN > PPPoE

Choose this option if your Service Provider uses PPPoE.

Dynamic PPPoE- receive an IPAddress automatically from your ISP. Static PPPoE-you have an assigned (static) IP Address.

Your PPPoE username provided by your Service Provider. Re-enter the PPPoE password

Enter the Service Name provided by your Service Provider (optional).

This option is only available for Static PPPoE. Enter the static IP Address for the PPPoE connection.

Primary DNS IP address provided by our ISP

This option is only available for Static PPPoE. Enter the static IP
Address for the PPPoE connection.	16
(Continued on the next page)