Section 3 - Configuration
Device Information
This page displays the current information for the
If your WAN connection is set up for a Dynamic IP address then a Release button and a Renew button will be displayed. Use Release to disconnect from your ISP and use Renew to connect to your ISP.
If your WAN connection is set up for PPPoE, a Connect button and a Disconnect button will be displayed. Use Disconnect to drop the PPPoE connection and use Connect to establish the PPPoE connection.
LAN: Displays the MAC address and the private (local) IP settings for the router.
WAN: Displays the MAC address and the public IP settings for the router.
Wireless Displays whether or not the status of the
JumpStart: JumpStart feature is enabled or disabled.
Wireless: Displays the wireless MAC address and your wireless settings such as SSID and Channel.
45 |
