Installation Specifications, Tools and Parts

Installation Specifications

Tools and Parts

IMPORTANT:

◊Installer: Leave these Installation Instructions with the homeowner.

◊Homeowner: Keep these Installation Instructions for future reference. Save these Installation Instructions for the local electrical inspector’s use.

Tools needed:

Make sure that you have the necessary tools and materials available for a proper installation.

◊Phillips screwdriver set

◊Slotted screwdriver set

◊Torx drive screwdriver set

◊Provide sufficient length 8’ (2.4m) to allow for a minimum of a 24” (610mm) diameter service loop of 1/4” (6mm) copper tubing and saddle valve for the water line (Do not use self- piercing valves)

◊Copper tubing cutter

◊Level - 2’ (.6m) and 4’ (1.2m) recommended

◊Appliance Dolly able to support 700lbs (317kg) and adequate manpower to handle the weight of the appliance

◊Various sized pliers

◊Allen wrench set

◊3/8” hex bolt nut driver or socket set

◊Crescent wrenches

◊Cordless drill and assorted drill bits

◊Masonite, plywood, 1/8” pressed fiberboard, cardboard or other suitable material to protect finished flooring

◊Appropriate materials to cover and protect the home and its furnishings during installation

Location Requirements

Your Dacor® refrigerator can be recessed in an opening between cabinets or installed at the end of a cabinet run using a side panel to enclose the refrigerator.

WARNING

Explosion Hazard – Keep flammable material and vapors, such as gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

IMPORTANT:

◊Observe all governing codes and ordinances.

◊Do not install the refrigerator near an oven, radiator, or other heat source, nor in a location where the temperature will fall below 55°F (13°C).

◊Floor must support the refrigerator weight, more than 600lbs (272kg), door panels and contents of the refrigerator.

◊Ceiling height must allow for side tipping radius.

◊Location should permit doors to open fully.

◊Location must permit the top grill to be opened.

Site Preparation

The solid sofit or ceiling should be within 1” (25mm) above the refrigerator. It the solid sofit is higher than 1” (25mm) or one is not available, then the refrigerator must be braced to prevent tipping during use.

If the anti-tip blocking is need.(see “Anti-Tip Blocking”on page 9)

IMPORTANT: To operate properly, the door must open a minimum of 90°. For installation in a corner, a 2 1/2” (64mm) filler strip is required to ensure the 90° opening. The floor under the refrigerator is to be level with the surrounding floor. To protect the floor when moving the refrigerator, place cardboard, or preferably a carpet remnant (backing up) on the floor.

100500 specifications

Dacor 100500 is a leading-edge product that exemplifies innovation and performance in the world of kitchen appliances. Known for its premium quality and stylish design, the Dacor 100500 stands out as a reliable and high-performing option for home chefs and culinary enthusiasts alike.

One of the main features of the Dacor 100500 is its advanced cooking technology, characterized by the use of a Dual-Fuel Convection system. This system combines the precise temperature control of gas cooking with the consistent heat circulation of an electric convection oven. As a result, users enjoy perfectly cooked meals every time, whether they are baking, roasting, or broiling. This makes the Dacor 100500 exceptionally versatile, catering to a wide array of cooking styles.

Another notable aspect of the Dacor 100500 is its intuitive interface. The appliance features a user-friendly touchscreen control panel that allows for easy navigation and control over various cooking functions. With this smart technology, users can select pre-programmed cooking modes, set timers, and adjust settings with ease, making the cooking experience more enjoyable and efficient.

Not only does the Dacor 100500 perform well functionally, but it also boasts an elegant design that complements any modern kitchen. The sleek stainless steel finish and seamless integration into cabinetry add a touch of sophistication. Additionally, the appliance is equipped with LED lighting, providing better visibility inside the oven while enhancing its overall aesthetic appeal.

Energy efficiency is another key characteristic of the Dacor 100500. It has been engineered to consume less energy without compromising performance. This makes it an eco-friendly choice for those looking to reduce their environmental footprint while enjoying exceptional cooking capabilities.

Safety features are also at the forefront of the Dacor 100500 design. It includes a child lock function, ensuring that little hands cannot inadvertently activate the appliance. Furthermore, the oven's cool-to-touch exterior minimizes the risk of burns, making it a safer option for families.

In summary, the Dacor 100500 is an outstanding appliance that integrates innovative cooking technology, elegant design, energy efficiency, and user-focused features. It is an ideal choice for those who value performance and style in the kitchen, ensuring that every culinary endeavor is met with success. Whether you're a seasoned chef or a novice home cook, the Dacor 100500 promises to enhance your cooking experience on multiple levels.

Dacor 100500 manual Installation Specifications, Tools and Parts, Location Requirements

Models: 100500