Getting Started
Before using your oven, become familiar with the features and control panel layout.
Below the oven mode touch pads are three touch pads labeled “CANCEL•SECURE,” “LIGHT” and “COOK TIME”. The “CANCEL•SECURE” touch pad enables the user to cancel the selection of an oven mode or Delay Timed program, or disable the control panel by pressing and holding the pad for approximately three (3) seconds. Once the control panel is in the “SECURE” mode, “OFF” will be displayed on the clock. The “LIGHT” touch pad turns the interior oven light “on” and “off.” The “LIGHT” touch pad will remain functional if the control panel has been disabled. The “COOK TIME” touch pad is used to select the length of time for a cooking process in Delay Timed cooking mode.
Clock functions are selected by pressing the touch pads located below the clock display and oven mode touch pads. Oven functions are chosen by pressing the touch pad for the desired mode. Once a clock or oven function has been chosen, a description of the selection will flash in the clock display area.
IMPORTANT:
After choosing a clock function or oven mode, you have six seconds to perform the next programming step. If the next step is not complete within six (6) seconds, the program selection displayed on the clock will disappear. Should this occur, just repeat the initial function selection.
Control Panel |
| |
Cool Air Slots | ||
| ||
Smoke Eliminator | Broil Reflector | |
Broil Element | Oven Light | |
Temperature Probe Socket | ||
Temperature Sensor | ||
Rack Support | ||
Convection Element | ||
Oven Rack | ||
Convection Fan | ||
Oven Light | ||
Convection Baffle | ||
| Butterfly Bake Element (patent pending) | |
| Door Hinge | |
| Door Gasket | |
Door Handle |
| |
| Oven Window | |
Lower Exhaust Grill |
| |
| Exhaust Air Grill Slots | |
| Figure 1: Oven Features |
Figure 2: EPICURE™ ECD227 and ECD230 Wall Oven Control Panel
Figure 3: MILLENNIA™ MCD227 and MCD230 Wall Oven Control Panel
Figure 4: PREFERENCE™ PCD230 Wall Oven Control Panel
3
