Installation Instructions

Verify the Package Contents

Unpack the parts box and verify that all parts have been included according to the parts list. If any item is missing or damaged, please contact the dealer immediately. Do not install a damaged or incomplete appliance.

Make sure you have everything necessary for proper installation before proceeding.

Parts List

A Light bulbs (2)

B Hood assembly with filters

C Light replacement tool

D Literature

E Dacor Stainless Steel Cleaner

A B

E

C D

STAINLESS

STEEL

CLEANER

Mounting Location Preparation

warning

Do not install the range hood unless the electrical service provided meets the range hood specifications. The electrical service to the range hood should be installed only by a licensed electrician.

Observe all governing codes and ordinances during site preparation and installation. Contact your local building department for further information.

Failure to properly anchor the hood to the wall may result in personal injury due to the unit falling off the wall.

A qualified technician must complete the installa- tion of this built-in appliance. More than one person is required to raise the hood into place. The owner is responsible to make sure the hood is properly installed.

To avoid an electric shock hazard and property dam- age, locate electric wires and water pipes and avoid drilling or cutting in the vicinity.

For maximum stability, the hood must be attached at the top and the back.

Determine the number, size and type of fasteners/ anchors required to attach the hood permanently to the wall and the ceiling/overhead cabinet. Use the weight on page 3 and the mounting surface materials to help determine the size(s) and type(s) required.

Make sure the mounting surfaces are able to handle the full weight of the hood. Reinforce if necessary.

6