Care and Cleaning
Cleaning the Interior
Convection Filter
warning
For your safety and proper oven performance,
The convection filter is located in the back of the oven chamber (upper chamber only on double ovens). Clean the filter regularly. If you allow it to become clogged, the oven’s convection cooking modes will not work properly. You also need to remove the filter during the self clean cycle.
To remove the convection filter:
When the oven is cool, put your fingers around the edges of the filter and gently push up.
To clean the filter:
Soak it in hot, soapy water. Rinse well. You may also place it in a dishwasher on the top rack. Dry the filter before
To install the convection filter:
Carefully hook the metal clips on the back of the filter over the metal bar across the fan hole. Make sure it is centered over the hole. Be careful not to scratch the porcelain surfaces with the back of the filter.
Door Gasket (Seal)
warning
Take extreme caution when cleaning the door gasket. Rubbing or displacing it may damage the tight door seal required for proper cooking and self cleaning.
Clean the door gasket by dabbing it with a solution of water and mild soap. Do not scrub it or it will become damaged.
Oven Racks
CAUTION
To prevent damage, do not self clean the oven racks.
To clean the oven racks, apply a solution of detergent and hot water. When you need to clean heavy soil, use a scouring pad such as steel wool with plenty of water. You may also use a solution of one cup of ammonia to 2 gallons of water.
If you accidentally leave the racks in the oven during self cleaning, you can polish them to make them easier to slide. Polish the rack edges with a soapy steel wool pad. Then apply a small amount of vegetable oil to the edges so that the racks slide more easily. Be aware that polishing will not completely remove the discoloration.
Broil Element
In most cases, any food that splatters on the boil element coils will burn off with normal broiler use. If desired you may wipe the element clean, when it is cool, with a soft damp cloth soaked in warm soapy water.
Meat Probe
warning
To prevent damage, do not immerse the meat probe in water.
The meat probe is constructed of silicone handles, a wire, a plug and a stainless steel skewer. To clean the skewer, use a scouring pad and hot, soapy water. When you clean the handles, wipe them with a soft sponge soaked with a solution of detergent and warm water.
Clips
Optional Broil Pan
The broil pan has a porcelain enamel finish. When you clean it, use a solution of detergent and hot water. If your broil pan is heavily soiled, use a scouring pad with plenty of water. Rinse it well after cleaning.
25